Results 1 to 5 of 5
  1. #1
    New Member DARKSHADOW's Avatar
    Join Date
    May 2010
    Location
    Southern Ontario
    Hammock
    HH Exploder
    Tarp
    Stock / hex
    Insulation
    UQ/pad
    Suspension
    DIY woopies&straps
    Posts
    39

    Looking for Hennessy DIY plans.

    Been awhile since I've posted here. But still hanging and spreading the word and making people envious of my restful sleeping in the back woods.

    Was looking for a write up on making a Hennessy clone it remember from a while back. Want to make one or two up just for hanging in the yard or in my man cave no net or anything. And a line on the material needed. Sorry limited to my phone at the moment and search is failing me.

    A little help would've awesome. Thanks.
    DAVE.


    The further you go,
    the longer it takes to get back.

  2. #2
    Senior Member
    Join Date
    Mar 2014
    Location
    Bremen, Georgia
    Hammock
    DiY WBBB using Argon 1.6 RipStop
    Tarp
    DiY Argon SilNylon
    Insulation
    Slickbag / Doobie
    Suspension
    Dutch Cinch Buckle
    Posts
    107
    Images
    9
    My understanding is to start with a 60" x 120" hammock go to the center of the 120" length measure 13" back from there towards the head on the "front and place a tie out point. Go back to center and go 13" towards the foot end on the "back" and put the 2nd tie out point. When tied out these create the asyme lay and will also allow you to use HH accessories.
    Then gather the ends and add your ridgeline. Fit a piece of noseeum over the ridge and fit your zipper.

    For the deluxe just go with a 132" by 60" hammock body with the timeouts in the same points.

    Someone chime in if you found the old post I have seen with drawings and correct me if I'm wrong.
    Good luck and welcome back
    Deja Moo: "The feeling you have heard this bull before"

  3. #3
    Syb's Avatar
    Join Date
    Nov 2010
    Location
    Trenton, NJ
    Hammock
    WBBB 1.1 DL/DIY
    Tarp
    OES/WB Superfly
    Insulation
    Incubator/Burrow
    Suspension
    WB Straps
    Posts
    1,811
    Images
    44
    Syb
    Enjoy the elevation

  4. #4
    Senior Member
    Join Date
    Mar 2014
    Location
    Bremen, Georgia
    Hammock
    DiY WBBB using Argon 1.6 RipStop
    Tarp
    DiY Argon SilNylon
    Insulation
    Slickbag / Doobie
    Suspension
    Dutch Cinch Buckle
    Posts
    107
    Images
    9
    Thanks Syb that was the EXACT article I was referring to..
    Deja Moo: "The feeling you have heard this bull before"

  5. #5
    New Member DARKSHADOW's Avatar
    Join Date
    May 2010
    Location
    Southern Ontario
    Hammock
    HH Exploder
    Tarp
    Stock / hex
    Insulation
    UQ/pad
    Suspension
    DIY woopies&straps
    Posts
    39
    Oh geez forgot about the stick forum that's right at the top of the page. Duh!

    Thanks
    DAVE.


    The further you go,
    the longer it takes to get back.

Similar Threads

  1. Plans for DIY 20* UQ
    By Mouseskowitz in forum Do-It-Yourself (DIY)
    Replies: 6
    Last Post: 10-03-2013, 09:06
  2. My DIY Bug Net Plans
    By ZMad2000 in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 12
    Last Post: 07-08-2010, 23:45
  3. UQ plans
    By Dutch in forum Under Quilts
    Replies: 12
    Last Post: 12-15-2009, 19:01
  4. Quilt plans
    By Dutch in forum Do-It-Yourself (DIY)
    Replies: 12
    Last Post: 03-24-2008, 20:23

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •