Some clarity; I like it.
With regards to pitching one side of a hex longer than the other, sure, it can be done. Just because the ridgeseam is in the center doesn't mean it has to be centered above the hammock. You'll need a continuous ridgeline under your tarp, but it's pretty easy to pitch them off-center and provide more length on one side and less on the other. Lots of folks use that trick when they run into weather with a smaller than ideal tarp. No problem.
Top of hills totally explains the wind-blown rain. Sorry about that, I just wasn't understanding wind-blown rain in a "jungle". Makes total sense now.
You're right about the diamond vs. square. Also, my experience is with tarps and
hammocks. Beyond that, I'm as newb of a tarp user as they come.
My only concern is that a folded configuration like you're describing is going to require additional lines strung here and there. I was more concerned about your tactical abilities and all the lines, but since it isn't that serious of an adventure I'll drop that line of thinking. It can be done easy enough, but it's going to be close quarters inside the tarp and that may make your condensation and fog issues more pronounced. I don't know for sure as I use big tarps when I want to be encapsulated, just a guess on my part really. Too bad the Sportsman Guide 12x12 doesn't come in a camo. That would really be a good bet.
I know a few of our vendors are open to custom work. If you like the pattern on the JRB hex, it may be worth your time to speak with them about a custom diamond or square tarp using their fabric. Otherwise, it sounds like the Bushcraft tarp is in the lead right now. I'd be interested in hearing more about it if you get it since there hasn't been much discussion of it here...yet.
Bookmarks