Results 1 to 5 of 5
  1. #1
    Senior Member
    Join Date
    Mar 2009
    Location
    S.E.
    Posts
    496

    MYOG pad extender

    MYOG pad extender

    --------------------------------------------------------------------------------

    This is a simple one. I wanted one simpler and lighter than the speer version with not so many indiviual pieces of foam. I have about 14 yds of this 1oz ripstop I got from walmart. Its super thin though.

    At any rate whipped up this pad extended to use over a neoair.
    Reason being is in case I get stuck on the ground I can be somewhat comfortable.

    The top part is a sewn tube made out of a 49" x 46" piece of nylon, hemmed. The finished length is 48" to match a neoair short.

    There is a flat sheet on the bottom that is 20" x 48" finished, sewn to the tube only on the 20" side and down the middle in the short direction to hold the wing pads in place.

    I might add some vecro dots to hold the blue pad a bit better. They can be shifted around.

    Shown is with a full length neoair.

    As shown the entire rigs weighs a total of 23.5 oz
    Nylon extender 2.5 oz
    Neoair reg 14 oz
    (2) 20 x 44" blue pads (12" out ea side) 7 oz

    With a small neoair it would weigh 18.5 oz

    These blue foam pads are from bass pro shops, 3/8" and fairly dense and weigh roughly 5 oz for a full length pad. With just blue foam, one full length and the 2 cross pieces it would weigh 14.5 oz.

    I will probably make a cold version set of wings with a double layer of foam on the outside 12". That would add another 3.5 oz.

    http://i195.photobucket.com/albums/z...ns3/padext.jpg

  2. #2
    Darby's Avatar
    Join Date
    Apr 2007
    Location
    Elizabeth City, North Carolina
    Hammock
    Switchback 1.9DL
    Tarp
    10x12 TTTG CatCut
    Insulation
    PolarPod
    Suspension
    TTTG Ring Buckle
    Posts
    660
    Images
    31
    I can't get the pic to come up, keep getting "page not found"
    Beer won't solve problems, but then again, neither will milk !
    Designer of the Switchback Hammock
    Tree to Tree Trail Gear:http://tttrailgear.com

  3. #3
    Senior Member
    Join Date
    Mar 2009
    Location
    S.E.
    Posts
    496
    See if this works


  4. #4
    HappyCamper's Avatar
    Join Date
    Aug 2007
    Location
    WV
    Hammock
    Warbonnet BB, 1.1 single
    Tarp
    JRB11x10 Z-P cuben
    Insulation
    Yeti JRB WestMtg
    Suspension
    webbing, Dutchclip
    Posts
    3,523
    Images
    47
    Nice! Thanks for the pics and info. I have yet to make one, but it's on my list. Why did you leave a gap between top wings and bottom wings?
    I intend to live forever, or die trying. -- Groucho Marx (1890 - 1977)

  5. #5
    Senior Member
    Join Date
    Mar 2009
    Location
    S.E.
    Posts
    496
    I am tall and thought that might be better for my shoulders and knees.

    Its sewn with just a line right in the middle of the 48" length.

    24" for the top pocket, 24" for the bottom, so the pads can be shifted together.

    I wont know the best way to set it up until I finish my asym hammock and try it out in cold weather.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •