Results 1 to 3 of 3
  1. #1
    Senior Member Curt's Avatar
    Join Date
    Apr 2007
    Location
    Pacific Northwest
    Posts
    140

    "Stacking" fabric

    I'm looking at making my first hammock. I can sew - I'm not magician, but I can certainly handle the minimal sewing needed to pull off a decent hammock.

    I think I want a double layer hammock for holding a pad. I need it to be strong to support a lot of weight - potentially near 400 if me, my kid, and possibly my dog are all chillin' in there at the same time. Ed Speer uses a 3.5 ounce fabric in his "C" hammock to handle 350lbs.

    My question is whether or not "stacking" fabrics produces the same strength as a single heavier fabric. For example, would 2 layers of 1.1 ounce fabric be stronger than 1 layer of 1.9 fabric? I've been messing with fabrics - mostly in clothing - for years but have never had to think about strength in this way. I'm thinking of a 1.9 main fabric with a 0.9 bottom layer. Just an idea - I'm not sold on it myself - but I'm curious about the strength aspect.

    Thanks!

    -Curt

  2. #2
    Senior Member blackbishop351's Avatar
    Join Date
    Oct 2006
    Location
    Greensboro, NC
    Hammock
    Homemade Speer-type
    Tarp
    BlackCat
    Insulation
    Potomac UQ
    Posts
    1,564
    Images
    59
    I think it would depend on the individual strengths of the different weighted materials. A more specific question (and perhaps more relevant) is, how consistent is the strength of ripstop by weight? That is, does the strength increase linearly with denier (which is what determines the weight)?

    Another interesting question, pertaining to your double-layering plans, is whether or not two layers of ripstop is stronger than the sum of the strengths of each layer individually. I think probably not - a bridge or a laminate beam is stronger than the sum of its parts, but that's because the pieces have lateral bracing between them. This isn't the case with a "standard" two-layer hammock. The layers are only connected at the edges, which isn't where most of the stress lies anyway.
    "Physics is the only true science. All else is stamp collecting." - J. J. Thompson

  3. #3
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,267
    Images
    35
    If the hammock was going to be holding that much weight (especially if there is going to be a child in the hammock) I would go with a heavy inner layer that you are pretty sure would hold you both, and then a thinner outer layer, possibly with a DWR coating.

    You are assuming that by using 2 layers the forces and stresses are evenly distributed over both layers, but I don't know if that would be the case.

    With a forum full of Physics gurus, engineers, and rocket scientists I'm sure you will get plenty of opinions on this matter.
    “Light thinks it travels faster than anything but it is wrong. No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it." -Terry Pratchett



    Premium Quality, Fresh Roasted Coffee
    www.meancatcoffee.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •