Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: bugnet idea

  1. #1
    New Member
    Join Date
    Jul 2007
    Location
    california
    Posts
    3

    bugnet idea

    hello all,

    I've made several bugnets for years, and i have found, the best material for me is a lycra mesh. I found, because It can stretch, I can cut it a tad shorter and get a nice shape to it when someone sleeps in it.





    the design construction is very easy.

    take a piece of netting about six inches longer than your hammock. hem the short ends with a 1.5 inch hem and run a cord through the hem. sew a zipper down the long edges and you're ready to go. this forms a hammock tunnel

    run your hammock through the tunnel and sinch up the cords on the bugnet as you would a bag of potatoes. Now, your ends are closed off to any unwanted visitors, but you can enter the hammock at will. once in zip up the zipper that runs along the side and you're done.

    if you don't want the net, undo one of the cinched up ends and slide it to the othe side out of the way.

    If you could help me, I would appreciate it. I want to make a new hammock with out the web through the seam design. However, I would like the hammock edges as tight as possible. what do you recommend as the best fold and whip for this purpose?

    thanks
    Alan

  2. #2
    Senior Member FanaticFringer's Avatar
    Join Date
    Oct 2006
    Location
    Lawrenceville, Ga
    Hammock
    JRB Bear Mtn. Bridge
    Tarp
    BlackCat/JRB 11x10
    Insulation
    Pad(s)/JRB Quilts
    Posts
    2,424
    Images
    34
    Welcome to the forum Alan,

    Nice directions to you bug net. Where can one find some lycra mesh?
    What do others think of lycra mesh vs. noseeums?
    "Every day above ground is a good day"

  3. #3
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    Try the Speer-type...it doesn't have webbing through the seams.
    http://www.tothewoods.net/HomemadeHammock.html

    And welcome to HF!
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

  4. #4
    Senior Member cameronjreed's Avatar
    Join Date
    May 2007
    Location
    Utah
    Posts
    165
    Images
    28
    Welcom to HF!!
    Nice looking bug net. Where can I get some lycra mesh?

    As mentioned above by Just Jeff..

    http://www.tothewoods.net/HomemadeHammock2.html

    Pay close attention to step 2. (whipping)
    Jeff show you how to fold and pull the hammock body so that the edges are not saggy. (although I like saggy edges)
    Enjoy!
    Last edited by cameronjreed; 07-08-2007 at 22:44.

  5. #5
    New Member
    Join Date
    Jul 2007
    Location
    california
    Posts
    3
    Believe it or not, i found the lycra mesh at Joann's fabrics. you'll know it when you see it because the holes look like tiny rectangles and it stretches.

    As for the taughtness on the edges of my hammock, what fold do you feel works better; the roll fold or the w fold?

    thanks
    Alan

  6. #6
    Senior Member cameronjreed's Avatar
    Join Date
    May 2007
    Location
    Utah
    Posts
    165
    Images
    28
    I like the W fold, but the fold does not affect the tightness of the edges. That it determined by the extra length you pull out (as described on JJ website)

  7. #7
    Senior Member NCPatrick's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    WB Traveler
    Tarp
    Custom OES tarp
    Insulation
    JRB Down UQ/TQ
    Suspension
    Whoopie slings
    Posts
    9,041
    Images
    40
    Hi Alan, I've recently made a bugnet just like what you described, except I used noseeum mesh instead. Works well, very configurable. Easy to make. It goes on over my hammock ridgeline and stays out of my face that way.

    I like the W fold, and like Jeff describes (and cameronjreed above), you can tension the sides more or less by pulling more side material for the fold. hth.


    "Civilization is the limitless multiplication of unnecessary necessities."
    - Mark Twain
    “I go to nature to be soothed and healed, and to have my senses put in order.”
    - John Burroughs

  8. #8
    New Member
    Join Date
    Jul 2007
    Location
    california
    Posts
    3
    thanks for the help guys

  9. #9
    Member Nudgeworth's Avatar
    Join Date
    Sep 2007
    Location
    Dunedin, New Zealand
    Posts
    52
    Hi Alan, do you reguire a ridgeline to holdup the lycra?

  10. #10
    Senior Member
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Hammock
    Claytor JH
    Tarp
    stock JH tarp
    Insulation
    CCF and body fat
    Posts
    109
    If lycra mesh stretches, won't the holes in it get bigger and allow bugs in? Or does it not matter due to the way you are using it?

    Neat idea, BTW.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •