Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Hybrid View

  1. #1
    titanium_hiker's Avatar
    Join Date
    Oct 2006
    Location
    The Wimmera, Australia
    Hammock
    DIY speer type
    Tarp
    OES Maccat
    Insulation
    JRB Nest+ORM
    Suspension
    Webbing straps
    Posts
    746
    Images
    18

    the franken-tarp

    Right. So I've got this tarp, right. And it's not that bad. Except that it's crap.

    It's rectangular. I've already added tie outs in the middle of the short sides, and it hangs semi-ok.

    I'll post the dimensions tomorrow (it's sleepy time for little hammockers in my time-zone) So I figured you guys could come up with some good suggestions until then.

    So: What would you do with an average rectangular tarp to make it not so average?

    It's most definitely not silnylon (light, waterproof, but not sil).

    thanks for the advice!

    titanium_hiker
    my hammock gear weights total: 2430g (~86oz)
    Winter: total 2521 (~89oz)
    (see my profile for detailed weights)

    gram counter, not gram weenie!

  2. #2
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,267
    Images
    35
    I've sorta got the same delima. I bought a 9x6 rectangluar silnylon tarp from trailforums.com for $5. I have been wanting to enlarge it a little bit to make it more hammock compatible, but I havn't decided what to do yet.

  3. #3
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    headchange - check out the end caps at www.garlington.biz

    th - dimensions?
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

  4. #4
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,267
    Images
    35
    Quote Originally Posted by Just Jeff View Post
    headchange - check out the end caps at www.garlington.biz
    Are you talikng about the Tarp Hood?

  5. #5
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    Yeah - that's what he calls them. Sorry.
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

  6. #6
    titanium_hiker's Avatar
    Join Date
    Oct 2006
    Location
    The Wimmera, Australia
    Hammock
    DIY speer type
    Tarp
    OES Maccat
    Insulation
    JRB Nest+ORM
    Suspension
    Webbing straps
    Posts
    746
    Images
    18
    dimensions- roughly 12 by 10 (ft), but of course it's metric, so it's not exact to feet lengths. And measuring by yourself doesn't yield NASA precision.

    Biggest gripe: very hard to pitch tight. but then again, my backyard isn't the most ideal place to hang- have to get creative for tying down on one side where the grass turns into concrete and wall.

    It also has 3 tie outs per side, which is annoying. I tried to diagonal pitch it (a while ago), which didn't work too well...

    TH
    my hammock gear weights total: 2430g (~86oz)
    Winter: total 2521 (~89oz)
    (see my profile for detailed weights)

    gram counter, not gram weenie!

  7. #7
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    Cut it down to an 8x10 tarp and make raingear and snakeskins from the other 4x10 piece.
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

  8. #8
    titanium_hiker's Avatar
    Join Date
    Oct 2006
    Location
    The Wimmera, Australia
    Hammock
    DIY speer type
    Tarp
    OES Maccat
    Insulation
    JRB Nest+ORM
    Suspension
    Webbing straps
    Posts
    746
    Images
    18
    I guess 8*10 is the standardish size- that's what Ed Speer sells.

    no one has had issues with coverage?

    I guess smaller = tighter staking.

    Thanks Jeff!
    my hammock gear weights total: 2430g (~86oz)
    Winter: total 2521 (~89oz)
    (see my profile for detailed weights)

    gram counter, not gram weenie!

  9. #9
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    Measure your hammock from knot to knot...you probably want at least a foot on each side. More is obviously better coverage, but this is less important with a rectangle tarp than a diamond or MacCat b/c the ends are protected better from blowing rain. Unless it's blowing in exactly from the end, obviously, but the corners of the rectangle protect an area that diamonds and MacCat standards don't...which is why the ridgelines are so much bigger than 10'.

    That said, I haven't actually used an 8x10...just seen them pitched on others' hammocks.

    But you could still make an 8x11 and have enough left for python skins and a stuff sack.
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

  10. #10
    titanium_hiker's Avatar
    Join Date
    Oct 2006
    Location
    The Wimmera, Australia
    Hammock
    DIY speer type
    Tarp
    OES Maccat
    Insulation
    JRB Nest+ORM
    Suspension
    Webbing straps
    Posts
    746
    Images
    18
    knot to knot when strung up or flat? I'm thinking strung up.

    titanium_hiker
    my hammock gear weights total: 2430g (~86oz)
    Winter: total 2521 (~89oz)
    (see my profile for detailed weights)

    gram counter, not gram weenie!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •