Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    tight-wad's Avatar
    Join Date
    Apr 2007
    Location
    Hoover, Al
    Hammock
    DIY Speer style
    Tarp
    Hallelujah
    Insulation
    "Sto" Serape & RRG
    Posts
    539
    Images
    40

    How to make ripstop waterproof?

    Just scored several yards of ripstop from wally's $1 bin in Cullman, Al ... Measured the dimensions and the weight, did the math, ~ 1.09 oz/yd. Planned to use it for a tarp... but... it fails the water test.

    So... Can you DIY to make ripstop into sil? If not, can you add reliable waterproofing for less $ than it would cost to just buy sil from Ed? I don't want to waste time making a leaky tarp! But I also don't like the thought that I just blew 10 bucks on fabric that I probably won't use up anytime soon. I can make a few things, but 30'?

  2. #2
    Senior Member GREEN THERAPY's Avatar
    Join Date
    Jul 2007
    Location
    DUNCAN BC CANADA
    Hammock
    DIYZipper top entry
    Tarp
    MEC silnylon
    Posts
    215
    Images
    46
    Quote Originally Posted by tight-wad View Post
    Just scored several yards of ripstop from wally's $1 bin in Cullman, Al ... Measured the dimensions and the weight, did the math, ~ 1.09 oz/yd. Planned to use it for a tarp... but... it fails the water test.

    So... Can you DIY to make ripstop into sil? If not, can you add reliable waterproofing for less $ than it would cost to just buy sil from Ed? I don't want to waste time making a leaky tarp! But I also don't like the thought that I just blew 10 bucks on fabric that I probably won't use up anytime soon. I can make a few things, but 30'?
    30 FEET WILL MAKE THREE 10 FOOT HAMMOCKS.... AHHHHH .... THE POSSIBILITIES......
    What I lack in knowledge I MORE than make up for with opinions.
    Green Therapy

  3. #3
    tight-wad's Avatar
    Join Date
    Apr 2007
    Location
    Hoover, Al
    Hammock
    DIY Speer style
    Tarp
    Hallelujah
    Insulation
    "Sto" Serape & RRG
    Posts
    539
    Images
    40
    But, its 1.1 oz. Unless you're making it for a munchkin, I would not trust it to hold much weight. Especially my 200 lbs.

    I will use some for a quilt, but I really want a tarp.

  4. #4
    Senior Member GREEN THERAPY's Avatar
    Join Date
    Jul 2007
    Location
    DUNCAN BC CANADA
    Hammock
    DIYZipper top entry
    Tarp
    MEC silnylon
    Posts
    215
    Images
    46
    Originally Posted by tight-wad
    Just scored several yards of ripstop from wally's $1 bin in Cullman, Al ... Measured the dimensions and the weight, did the math, ~ 1.09 oz/yd

    I guess you re did the math..... I have used 1.1 oz for hammocks and I weigh 205 .... have held me so far, just hope I am not being overly optimistic....
    What I lack in knowledge I MORE than make up for with opinions.
    Green Therapy

  5. #5
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    DIY w/ pull-outs
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing & rings
    Posts
    10,596
    Images
    319
    Quote Originally Posted by GREEN THERAPY View Post
    Originally Posted by tight-wad
    Just scored several yards of ripstop from wally's $1 bin in Cullman, Al ... Measured the dimensions and the weight, did the math, ~ 1.09 oz/yd

    I guess you re did the math..... I have used 1.1 oz for hammocks and I weigh 205 .... have held me so far, just hope I am not being overly optimistic....
    i made a hammock out of 1.1oz last year. it did fine for a while, but one night... RRRRIIIPPPPPP, thud
    don`t leave the CREATOR out of the creation!

  6. #6
    Senior Member GREEN THERAPY's Avatar
    Join Date
    Jul 2007
    Location
    DUNCAN BC CANADA
    Hammock
    DIYZipper top entry
    Tarp
    MEC silnylon
    Posts
    215
    Images
    46
    Quote Originally Posted by slowhike View Post
    i made a hammock out of 1.1oz last year. it did fine for a while, but one night... RRRRIIIPPPPPP, thud
    do you know where the rip started from, the edge or in the middle of hammock? ..... I have been using velcro closures for the double hull hammock that is made from 1.1 and it runs full length of the edge of the hammock and into the whipping. The hammock is top loading so the edge with the velcro is the side I get in from and gives the outer edge more strength.

    The last one I built as a single hull hammock and sewed a one inch poly strap the full length and into the whipping on the edge I will be getting in the hammock from. I sew the bug net to the opposite side and zipper on the re inforced side, so the main edge strain is always on that side...
    What I lack in knowledge I MORE than make up for with opinions.
    Green Therapy

  7. #7
    tight-wad's Avatar
    Join Date
    Apr 2007
    Location
    Hoover, Al
    Hammock
    DIY Speer style
    Tarp
    Hallelujah
    Insulation
    "Sto" Serape & RRG
    Posts
    539
    Images
    40
    Has anybody tried a waterproofing product with good success?

    Could I just mix up a big batch of silicon and white gas and shove the fabric in? Would that make it sil? or a bomb?

  8. #8
    Senior Member GREEN THERAPY's Avatar
    Join Date
    Jul 2007
    Location
    DUNCAN BC CANADA
    Hammock
    DIYZipper top entry
    Tarp
    MEC silnylon
    Posts
    215
    Images
    46
    http://www.hammockforums.net/forum/s...hlight=silicon

    here is a previous thread that talks about what you want
    What I lack in knowledge I MORE than make up for with opinions.
    Green Therapy

  9. #9
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    DIY w/ pull-outs
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing & rings
    Posts
    10,596
    Images
    319
    Quote Originally Posted by GREEN THERAPY View Post
    do you know where the rip started from, the edge or in the middle of hammock? ..... I have been using velcro closures for the double hull hammock that is made from 1.1 and it runs full length of the edge of the hammock and into the whipping. The hammock is top loading so the edge with the velcro is the side I get in from and gives the outer edge more strength.

    The last one I built as a single hull hammock and sewed a one inch poly strap the full length and into the whipping on the edge I will be getting in the hammock from. I sew the bug net to the opposite side and zipper on the re inforced side, so the main edge strain is always on that side...
    here's a picture. http://www.hammockforums.net/gallery...ckfailure2.jpg
    there are 2 more pictures in my gallery.
    having tied the ends w/ knots probably didn't help for one thing. also it was an unknown, non-ripstop fabric (nylon?) from the $1.00 bin.
    it sure was comfy... & light (about 7 ozs before adding supports if i remember correctly).
    don`t leave the CREATOR out of the creation!

  10. #10
    Senior Member GREEN THERAPY's Avatar
    Join Date
    Jul 2007
    Location
    DUNCAN BC CANADA
    Hammock
    DIYZipper top entry
    Tarp
    MEC silnylon
    Posts
    215
    Images
    46
    Gulp.... that does look like a quick trip to ground. The stuff I have is rip stop but is pretty thin. AS you say it sure is comfortable and light. I guess the extra stretch making it conform better makes it comfy. Hard to say from the pic where it let go first.
    What I lack in knowledge I MORE than make up for with opinions.
    Green Therapy

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •