Page 1 of 17 12311 ... LastLast
Results 1 to 10 of 167
  1. #1
    ^shane^'s Avatar
    Join Date
    Apr 2009
    Location
    Arlington, TX
    Hammock
    WL Light Owl/Dangerbird
    Tarp
    WBBMJ Spinn+doors
    Insulation
    HammockGear Down!!
    Suspension
    Whoopies
    Posts
    722
    Images
    13

    My tarp guy lines

    I'm an old Boy Scout and I know my knots. I also know that when weather is coming, or it's just plain cold, I want quick and secure over knots.

    Instead of going the bowline to tarp and taut-line hitch to stake route, I wanted something that would be easier (hard to accomplish) and would be faster (hard to accomplish).

    I've got Spinn tarps so stretch really isn't a factor, but I did want to incorporate some sort of "shock absorber" at each guy point to allow a little movement and give when the tarp is hit by big wind gusts (Texas weather of course).

    I'd seen some of the self tensioning guy lines using the sling-shot tubing at the TX hang. Those work for tensioning, but to adjust you have to pull up the stake and replace it. That option was out.

    I was intrigued by the mini line-loks being sold at the hammockforums store. I'd looked at the instructions for them, and didn't see an application I was trying to get, but they were cheap, so I bought 8 pair (4 pair per tarp). It took about 5 minutes playing around with the line-loks to figure out how to string them to get the application I was shooting for.

    So... I put the guy line system together. Guys at the 4 tarp corners are 6' long. Guys at the 4 panel pull outs are 12' long.


    1. I started with a 13" long piece of 3/32" shock cord.
    2. I fed one end of the shock cord through one of the holes in the line-lok, then closed the loop with a fisherman's knot.
    3. I fashioned the locked brummel loop in one end of zing-it.
    4. I fed the other end of the zing it through the line-lok in a manner to be able to pull for tension or lift to release the cam.
    5. I finished the other end of the guy line with a small back splice to prevent that end from working back out of the line-lok.
    6. Larks head the shock-cord loop to the tarp pull out ring.

    To use the guy line:

    1. Hang your tarp.
    2. Place stake in the ground.
    3. Place guy line loop around the stake.
    4. Pull on loose end of guy line until shock cord loop begins to stretch (I stop pulling when I get about 1" of stretch in the loop).
    5. DONE.

    To loosen the guy line:

    1. Lift up on the loose end of the guy line.

    Here's a small video of the system in use:


    Some stills of the system:



    Last edited by ^shane^; 11-24-2010 at 08:18. Reason: fix youtube link
    "One of the best things you can do in this world is take a nap in the woods." ~ Jayber Crow by Wendell Berry

    "While it may be a lot of work, the view is best from the summit." ~ an anonymous staff member of Philmont Scout Ranch

    Enjoy the day
    Shane

  2. #2
    Syb's Avatar
    Join Date
    Nov 2010
    Location
    Trenton, NJ
    Hammock
    WBBB 1.1 DL/DIY
    Tarp
    OES/WB Superfly
    Insulation
    Incubator/Burrow
    Suspension
    WB Straps
    Posts
    1,647
    Images
    41
    Shane, as a newbie, this is exactly what I was looking for. I had your same thoughts/concerns "Those work for tensioning, but to adjust you have to pull up the stake and replace it. That option was out." This will be one of my way too many newest additions. Thanks again!

    Syb

  3. #3
    Senior Member Muskrat's Avatar
    Join Date
    Aug 2009
    Location
    Irmo, SC
    Hammock
    WBBB Double 1.7
    Tarp
    Super Fly
    Insulation
    Burrow,Yetti,WInc
    Suspension
    webbing/Dutchclips
    Posts
    1,010
    Nice setup you got there, I like it. I will look to do the same. Thanks for posting.
    “He doesn't know the meaning of the word fear, but then again he doesn't know the meaning of most words”
    - Bobby Bowden

  4. #4
    cataraftgirl's Avatar
    Join Date
    Aug 2010
    Location
    Sandy, Utah
    Hammock
    Trek Light double
    Tarp
    Wilderness Logics
    Insulation
    HG/Leighlo
    Suspension
    webbing & CB
    Posts
    1,160
    Thanks Shane. That looks super easy to put together. Do you leave the set-up on your tarp when you take it down, or do you take it off each time? Looks like you could go either way since it's just a larkshead to the tarp D-ring.
    Thanks for the video & pics. Much easier to figure out the concept with pictures in addition to the written description.
    KJ

  5. #5
    Poppabear's Avatar
    Join Date
    Dec 2009
    Location
    Lexington Park, MD
    Hammock
    Warbonnet Blackbird 1.7
    Tarp
    Zpacks Cuben Fiber
    Insulation
    Leigh's UQ
    Suspension
    Whoopies/Treestrap
    Posts
    2,642
    Quick and easy I like it!
    Terry

  6. #6
    Senior Member fred1diver's Avatar
    Join Date
    Aug 2008
    Location
    Gatineau, qc, canada
    Hammock
    diy DL HH explorer asym w/shelf
    Tarp
    jrb hex spinn
    Insulation
    winter crowsnest
    Suspension
    whoopies/toggles
    Posts
    357
    A prussik on the tarp end would also have worked, that's the system I'm installing on mine

  7. #7

    Join Date
    Oct 2006
    Location
    Elmira, NY
    Hammock
    WB Ridgerunner, Dangerbird
    Tarp
    Big Daddy
    Insulation
    HG 3 Season/IX UQ
    Suspension
    Straps
    Posts
    1,864
    Images
    10
    I already use line locks but without the bungees. I like your system better and plan on using it. Thanks for sharing.

  8. #8

    Join Date
    Dec 2007
    Location
    Mountainside, NJ
    Hammock
    depends on weather
    Tarp
    SWT
    Insulation
    various
    Suspension
    Straps, Dutch Clip
    Posts
    1,502
    Images
    11
    Can you all see better now? 'Cause the light just went off in my head! Or would that be "went on"?

    I wonder if having a standard shock cord setup (where the shock cord is clove hitched to some guyline and both are attached to the tarp D ring) attached to the line loc via the guyline would give an extra degree of safety. This way, if the shock cord failed, you would still have the guyline attached. Basically, you're just replacing the guyline from the shock cord to the stake with the line loc and a guyline with the loop spliced in the end to go on the stake. I might carry a couple of sturdy mini-biners or soft shackles to use with the stake end loop on permanent objects like trees that are used in place of stakes.

  9. #9
    Shewie's Avatar
    Join Date
    Dec 2009
    Location
    Yorkshire, UK
    Hammock
    WBBB 1.1SL/UKHamm
    Tarp
    HG Cuben 4S/CamoSF
    Insulation
    UKHamm/HG/Unspon
    Suspension
    WhoopieDutchness
    Posts
    1,678
    Interesting use of the lineloks

    I tried them in the conventional way on my tarps a couple of years ago but didn't really get on with them. I might dig them out again and try them your way.

  10. #10
    Buenos's Avatar
    Join Date
    Sep 2010
    Location
    Ellensburg, WA
    Hammock
    WL Snipe
    Tarp
    HG4seasonCFw/doors
    Insulation
    Hammock gear UQ/TQ
    Suspension
    Whoopie slings
    Posts
    372
    That's a nifty little system. Thanks for showing that off.

    Will 1/8" shock cord fit in the lock?
    respectfully,
    Jose Diaz
    www.diaztools.com
    HF members get 30%discount

    Diaz tools Youtube channel
    Facebook page

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •