Results 1 to 3 of 3
  1. #1
    Senior Member Can't Wait's Avatar
    Join Date
    Jan 2009
    Location
    Kittanning, Pa
    Hammock
    WB Traveler / Blackbird
    Tarp
    Superfly/MacCat
    Insulation
    Incubator/ 3/4
    Suspension
    Strap Cinch buckle
    Posts
    1,262

    Help suggestion garage hang !

    Guys I want to do a test run with my incubator and while my jeep is done getting body work travel is limited . My question ? Is there a way of hanging my warbonnet traveler with the cinch buckle strap suspension with dutch clips from my garage rafters the garage is un heated so will get same affect as outside pretty close . I wasn't sure how this would work since straps are not going horizontally around a circumference Thanks for the help

  2. #2
    Senior Member Cannibal's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Hammock
    Warbonnet ON!
    Tarp
    SuperFly or MacCat
    Insulation
    Yetis & Mambas
    Suspension
    Webbing and rings
    Posts
    13,919
    Images
    136
    Wrap the straps around the rafter just like you would a tree; simple.
    Yes this can be done if you have enough available distance. You'll likely need a span of at least 20' depending on the height of the ceiling.

    Edit: I would tie to the corners of the rafters rather than the center of a span. I suspect that span would snap pretty easily.
    Trust nobody!

  3. #3
    Senior Member Can't Wait's Avatar
    Join Date
    Jan 2009
    Location
    Kittanning, Pa
    Hammock
    WB Traveler / Blackbird
    Tarp
    Superfly/MacCat
    Insulation
    Incubator/ 3/4
    Suspension
    Strap Cinch buckle
    Posts
    1,262
    Quote Originally Posted by Cannibal View Post
    Wrap the straps around the rafter just like you would a tree; simple.
    Yes this can be done if you have enough available distance. You'll likely need a span of at least 20' depending on the height of the ceiling.

    Edit: I would tie to the corners of the rafters rather than the center of a span. I suspect that span would snap pretty easily.
    Now are you referring to using the same rafter length wise just tying off to end . or spanning 20 ft from one corner to another corner rafter Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •