Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Shewie's Avatar
    Join Date
    Dec 2009
    Location
    Yorkshire, UK
    Hammock
    WBBB 1.1SL/UKHamm
    Tarp
    HG Cuben 4S/CamoSF
    Insulation
    UKHamm/HG/Unspon
    Suspension
    WhoopieDutchness
    Posts
    1,678

    Routing and finishing off shockcord

    So I've just made a weather shield for my underquilts but now I'm not sure which is the best way to use my shockcord. Should I just run it down one channel, loop out of the end, back down the other channel and then finish with a knot at the other end ?

    Sorry for the naff drawing but kind of like this ...

  2. #2
    BrianWillan's Avatar
    Join Date
    Aug 2009
    Location
    Oshawa, Ontario, Canada
    Hammock
    Martian Bridge (DIY)
    Tarp
    Ogee / UGQ B.A.T.
    Insulation
    HG Inc-BE / Wiggys
    Suspension
    Whoopie Slings
    Posts
    1,869
    Images
    7
    Quote Originally Posted by Shewie View Post
    So I've just made a weather shield for my underquilts but now I'm not sure which is the best way to use my shockcord. Should I just run it down one channel, loop out of the end, back down the other channel and then finish with a knot at the other end ?
    That would certainly work if you have a partial length underquilt that you wish to protect. If your quilt is full length, then just having loops in the corners for attachment points also works.

    Cheers

    Brian

  3. #3
    Shewie's Avatar
    Join Date
    Dec 2009
    Location
    Yorkshire, UK
    Hammock
    WBBB 1.1SL/UKHamm
    Tarp
    HG Cuben 4S/CamoSF
    Insulation
    UKHamm/HG/Unspon
    Suspension
    WhoopieDutchness
    Posts
    1,678
    Quote Originally Posted by BrianWillan View Post
    That would certainly work if you have a partial length underquilt that you wish to protect. If your quilt is full length, then just having loops in the corners for attachment points also works.

    Cheers

    Brian
    Thanks Brian

    With the loops, do you mean to just take them directly to the UQ rather than to my buckles or gathered ends on my BB ?
    It's a good point, I have all these loops along my Snugfit which I could use instead of going the shockcord route.

    Hmmmm

  4. #4
    MAD777's Avatar
    Join Date
    May 2009
    Location
    South Florida
    Hammock
    DIY, WBBB & Switchback
    Tarp
    HG cuben,OES Spinn
    Insulation
    DIY down 3/4 UQ/TQ
    Suspension
    Dynaglide & Dutch
    Posts
    8,601
    Images
    39
    Shock cord is HEAVY!!
    If you are backpacking, you want to minimize the use of it.
    Mike
    "Life is a Project!"

  5. #5
    Whoooo Buddy)))) Shug's Avatar
    Join Date
    Oct 2007
    Location
    Minnesota
    Hammock
    DIY GreenBeanHammock
    Tarp
    DIY Tarps/HG Cuben
    Insulation
    Frankenquilt/Pod
    Suspension
    Whoopie Slings
    Posts
    14,495
    Images
    62
    I just have mine on the ends. My weathershield can come up higher than my hammock and block the wind. Works for me goodly that way.
    Shug
    Whoooo Buddy)))) I Love Onions, Grits, Greens, Livermush, NC Style BBQ, Potted Meat, Anchovies, 'Naner Puddin", Peanut Butter Pie, Red Velvet Cake and Cocoa and Straaaaaawwwwberrrry Milk and Coffee Crisps....
    I Hope Heaven has a Bakery!!!!



    Shug's YouTube Videos

    Hammock How-To Videos ..... Essentials For Noobs

    Shug and Friends Jammin'

  6. #6
    creativeKayt's Avatar
    Join Date
    Sep 2010
    Location
    Pacific Northwest
    Hammock
    Ask me tomorrow
    Tarp
    Old Blue
    Insulation
    DIY, HG Incubator
    Suspension
    Agnostic
    Posts
    1,107
    Images
    1
    Yep. You can do loops on each of the corners and maybe one or two on each side that you can attach to your UQ or hammock rigging to minimize weight and bulk.

    Good illustration of what you were thinking! Mee like-ey.

  7. #7
    OutandBack's Avatar
    Join Date
    Dec 2010
    Location
    Denver, CO
    Hammock
    Snipe WinterGnome
    Tarp
    TtTTG 12x10
    Insulation
    WL-TQ/UQ, HG 3/4UQ
    Suspension
    stock
    Posts
    4,232
    Images
    129
    I think you will need some way to gather the ends to help it seal better on the ends.
    I like the SC along the sides that should really help the top edges snug up along the hammock.

    I would not worry about the ounce or two of extra weight after all this is your winter kit and in
    winter fit and function over rules weight.

  8. #8
    Shewie's Avatar
    Join Date
    Dec 2009
    Location
    Yorkshire, UK
    Hammock
    WBBB 1.1SL/UKHamm
    Tarp
    HG Cuben 4S/CamoSF
    Insulation
    UKHamm/HG/Unspon
    Suspension
    WhoopieDutchness
    Posts
    1,678
    Thanks again folks, a few more ideas to try when i get home tonight

    Quote Originally Posted by OutandBack View Post
    I think you will need some way to gather the ends to help it seal better on the ends.
    I'll be putting a short length of SC in the end channels to cinch it up, I'll try to get some pics tonight.

  9. #9
    Senior Member rjcress's Avatar
    Join Date
    Oct 2010
    Location
    Central NC
    Hammock
    DIY FrankenBird + 5 other DIYs
    Tarp
    DIY Sil Ogee, etc.
    Insulation
    IX UQ & TQ +fleece
    Suspension
    DIY whoopies
    Posts
    762
    Images
    19
    Quote Originally Posted by Shewie View Post
    Thanks again folks, a few more ideas to try when i get home tonight

    I'll be putting a short length of SC in the end channels to cinch it up, I'll try to get some pics tonight.
    I've got a diagram and pics of how I did my adjustable UQ suspension in the DIY triangles article here:
    http://gear-report.com/how-to-make-d...riangles-myog/

    What you drew might work, but a prefer more control over how much itcan slide back and forth on the shockcord. Also agree that the ends might benefit from cinching
    "I keep telling myself that if I make perfect seams, nobody will believe that I made it... " -JohnSawyer

    My outdoor gear review site http://gear-report.com
    Gear reviews, DIY / MYOG projects, Outdoor gear discounts, sales and coupons updated daily

  10. #10
    Alamosa's Avatar
    Join Date
    Aug 2010
    Location
    Bozeman MT
    Hammock
    DIY
    Tarp
    12' Winter Shelter
    Insulation
    DIY quilts
    Suspension
    CCS
    Posts
    947
    Nice diagrams and descriptions, rjcress.
    We must, indeed, all hang together, or assuredly we shall all hang separately. - Ben Franklin
    (known as a win-win on this forum)

    Wood Stove Review Project Thread - http://www.hammockforums.net/forum/s...ad.php?t=46450
    Tracking Spreadsheet - https://docs.google.com/spreadsheet/...TZlVUtBNGQtU0E

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •