Page 1 of 2 12 LastLast
Results 1 to 10 of 21

Hybrid View

  1. #1
    Senior Member
    Join Date
    Aug 2007
    Location
    Auburn, WA
    Posts
    152

    Knots for ring buckle system?

    The last time I went winter camping I fell on my butt twice from the ring buckles loosening up. I'm curious as to what knots work the best to stop the webbing from sliding. Usually I just tie like three half hitches and that seems to work... most of the time.

  2. #2
    I think a simple slip knot works best. Bring the webbing around itself, make a blight and bring it back through the opening. I've been using it with no slipping and it sounds like it's what the rest of us are tying. I think three half hitches are overkill and there is something else wrong if you are still having failures.

  3. #3
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    DIY w/ pull-outs
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing & rings
    Posts
    10,595
    Images
    319
    don`t leave the CREATOR out of the creation!

  4. #4
    kayak karl's Avatar
    Join Date
    Dec 2007
    Location
    South, South Jersey
    Posts
    3,172
    Images
    7

    ty

    Quote Originally Posted by slowhike View Post
    good idea. i get a slow slip in cold weather. a knot will help.

  5. #5
    Senior Member Cannibal's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Hammock
    Warbonnet ON!
    Tarp
    SuperFly or MacCat
    Insulation
    Yetis & Mambas
    Suspension
    Webbing and rings
    Posts
    13,919
    Images
    136
    Slipknot here; I like the band too! Doesn't add more than a few seconds to set-up and easy to remember. If your butt hits the ground...you forgot.
    Trust nobody!

  6. #6
    Member dallas's Avatar
    Join Date
    Aug 2007
    Location
    Dallas, TX
    Hammock
    HH Hyperlight w/ring buckles
    Tarp
    MLD cuben fiber
    Insulation
    JRB quilt / GG pad
    Posts
    64
    Slowhike,
    That's the knot that my son and I both use and it has never allowed the straps to slip. Very easy to tie and untie and works every time.
    John

  7. #7
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    DIY w/ pull-outs
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing & rings
    Posts
    10,595
    Images
    319
    Quote Originally Posted by dallas View Post
    Slowhike,
    That's the knot that my son and I both use and it has never allowed the straps to slip. Very easy to tie and untie and works every time.
    John
    yeah, as long as i remember to do it, there's never a problem.
    don`t leave the CREATOR out of the creation!

  8. #8
    Rat's Avatar
    Join Date
    Oct 2006
    Location
    Bertram, Texas
    Hammock
    DIY 126 x 60 Tablecloth
    Tarp
    JRB 10 x 11
    Insulation
    MMG IX Universal
    Suspension
    Whoopie
    Posts
    1,100
    Images
    22
    If you hafta tie a knot anyway why not just use a loop of webbing or cord and save the weight of the cinch rings? A knot is a knot wether it is sround a cinch ring or cord loop right?
    "I aim to misbehave." - Capt. Mal Reynolds
    Mind of a Rat Youtube Channel

  9. #9
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    DIY w/ pull-outs
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing & rings
    Posts
    10,595
    Images
    319
    Quote Originally Posted by Hogn8r View Post
    If you hafta tie a knot anyway why not just use a loop of webbing or cord and save the weight of the cinch rings? A knot is a knot wether it is sround a cinch ring or cord loop right?
    i don't know. i was just thinking that because the ring buckles do most of the holding, there's less bunching of the webbing & the load is spread out over a little larger area.
    therefore easier on the webbing.

    also, if that same simple knot were tied, say onto a webbing or cord loop, would it hold w/o slipping?
    and i would think if it did, it would be locked down much tighter, putting more stress on the knot area, as opposed to the knot just serving as a stopper knot after most of the holding work is done by the buckles.

    but i'm open to hearing other ideas.
    don`t leave the CREATOR out of the creation!

  10. #10
    Rat's Avatar
    Join Date
    Oct 2006
    Location
    Bertram, Texas
    Hammock
    DIY 126 x 60 Tablecloth
    Tarp
    JRB 10 x 11
    Insulation
    MMG IX Universal
    Suspension
    Whoopie
    Posts
    1,100
    Images
    22
    Knot breaking strength comparison chart

    Like I said, no webbing, but good info.
    "I aim to misbehave." - Capt. Mal Reynolds
    Mind of a Rat Youtube Channel

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •