Results 1 to 2 of 2
  1. #1
    Senior Member Flangler's Avatar
    Join Date
    Nov 2010
    Location
    Arlington, VA
    Hammock
    WBBB 1.1DL
    Tarp
    CTF3 Cuben
    Insulation
    Phoenix 3S, GoLite
    Suspension
    Stock
    Posts
    158

    ThermaRest Bishop Bag

    I'd be surpised if someone else hasn't already done this, but here goes.

    I wanted a bishop bag for my hammock and suspension because 1)it looks cool and 2) it sounds cool. I just knew I could figure something out with the dozens of empty stuff sacks I had around. Mind you...I am not the least but handy around the house, don't sew, and my usual idea of DIY is calling my brother 'myself.'

    And there it was. The stuff sack that I bought with my ThermaRest a few years back. If you've ever owned a ThermaRest and the accompanying sack, you know how useless that sack is; once that pad comes out the first time, it's never going back in!

    The great thing about that sack, though, is the 'handle' at the end. It's really a deep pocket sewn onto the outside south end of the sack. I picked up a cheapo grommet kit, punched one into the end beneath that handle flap, fed one whoopie through, and oila! The handle/pocket has plenty of room for that end's suspension and webbing, too, and keeps it all nice and tucked away, ready for rapid deployment. Thought I'd post in case someone else out there might want to get or make a bishop bag; I think the ThermaRest stuff sack goes for $15 or so.

    Sadly, however, the grommet came off a few weeks later. I assume silnylon requires some sort of reinforcement for a metal grommet like that but, like I said, total DIY noob here. Thought I'd try duct tape, but nothing really sticks to silnylon, does it? The hole hasn't ripped wide or anything, so for now the makeshift bishop bag is performing flawlessly. I'm unsure of the official manufacturer's size of the bag, but it was for a full length self inflatable pad (that, of course, will never be used again ). It is large enough and sturdy enough to hold my ENO double, MacCat Deluxe w/guylines and figure 9s, stakes, suspension, a pair of 6' tree huggers, and a couple of mini s-biners.

    Images show size comparison with a standard nalgene and the end handle pocket. Webbing, whoopie, toggle all fit in there and hide away; I pulled them out a bit just for the photo.
    Attached Images Attached Images
    “Simplicity in all things is the secret of the wilderness and one of its most valuable lessons. I think the matter of simplicity goes further than just food, equipment, and unnecessary gadgets; it goes into the matter of thoughts and objectives as well. When in the wilds, we must not carry our problems with us or the joy is lost.” -Sigurd Olson

  2. #2
    Jsaults's Avatar
    Join Date
    Sep 2009
    Location
    St.Albans WV
    Hammock
    HH, CJH NX-250, WBBB 1.7 dbl
    Tarp
    Std, Hex, or WBSF
    Insulation
    Burrows&Incubators
    Suspension
    Poly web w/AHE buc
    Posts
    1,509

    Great minds run in the same rut!

    I was looking for a similar storage solution for my Clark NX-250. Mainly looking for a way to keep the sections of spreader rods together with the body and fly. Finding a long, skinny stuffsack was a chore, but the TR ones fit the bill.

    I was too lazy to install a grommet, so I just cut the seam stitching and threw a few stitches in to prevent total unraveling.

    My sack is a newer model, with a webbing daisy chain sewn to the side. Great place to clip 'biners for all-in-one suspension systems.

    Jim

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •