Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15

    JH on the way...

    After much researching and debating, its done deal... now, the wait.
    solid build quality, and woodland camo are main factors...

    thinking of setup ideas, something continuous like neo's set up...
    -use factory straps as tree huggers, run a biner on each end, straps or climbing rope to a pair of rings with garda hitch, close to the ends of the hammock for drip spot.
    -then tarp like shugs, toggle to prussik/tarpend, "", and then fig 9 biner.

    woopie slings look cool, but idk...
    maybe one ring at hammock end, to woopie, to tree strap...?
    should work, just want some metal to make sure water drips to the ground and stays out of the hammock...

  2. #2
    BillyBob58's Avatar
    Join Date
    Jan 2007
    Location
    Tupelo, MS
    Posts
    8,463
    Images
    353
    Quote Originally Posted by Brent338 View Post
    After much researching and debating, its done deal... now, the wait.
    solid build quality, and woodland camo are main factors...

    thinking of setup ideas, something continuous like neo's set up...
    -use factory straps as tree huggers, run a biner on each end, straps or climbing rope to a pair of rings with garda hitch, close to the ends of the hammock for drip spot.
    -then tarp like shugs, toggle to prussik/tarpend, "", and then fig 9 biner.

    woopie slings look cool, but idk...
    maybe one ring at hammock end, to woopie, to tree strap...?
    should work, just want some metal to make sure water drips to the ground and stays out of the hammock...
    So you got a Claytor JH? Sweet! Listen, while your figuring out the fancy suspension options, don't sell short the stock suspension and go ahead and get started hanging with it. I am probably odd man out around here regarding that suspension. But other than wicking water ( easily solved ) that suspension is UL and works about as good as any.
    http://www.mosquitohammock.com/hammockknots.html

    For the water problems, either
    a: simply put a couple of extra knots on each side of the channel. @ knots on each side effectively stopped all water problems for me.
    B: cut the stock rope, leaving a small piece thru the channel. Tie a bowline of figure 8 with a loop on each side of the channel, and put a biner or ring through the loops. attach the rest of the stock rope to the ring, run around the tree and back to the ring, finish with a couple of slippery 1/2 hitches.

    Either of the above is just as quick and easy to adjust as any other suspension. Just do a mod to stop the water. If using a ring/biner, keep it under the tarp, of course.

    Or, just do Whoopies or something else for fun. It's all good!
    For I consider that the sufferings of this present time are not worthy to be compared with the glory that is to be revealed to us....that the creation itself also will be set free from its slavery to corruption into the freedom of the glory of the children of God. For we know that the whole creation groans and suffers the pains of childbirth together until now.
    Romans 8:18,21-22

  3. #3
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15
    shipped with tracking #... now only 10-15 short days....

    picked up...
    2- nano 23 carabiners
    2- easton alum 3" sections
    2- easton spikes
    2- fig 9, 50lb. carabiners
    5' shock cord
    10' 3mm climbing rope
    150' 7/64 green, amsteel blue

    got some fabricating to do soon...

    woopie slings, marlin spike option... biner option...
    with woopie shoft shackle prussik's on tarp ridgeline... hmmmm

  4. #4
    Senior Member TheWild's Avatar
    Join Date
    Jul 2010
    Location
    Denmark
    Hammock
    WB Blackbird
    Tarp
    HG Cuben
    Insulation
    Incubator & Burrow
    Suspension
    Whoopie slings
    Posts
    492
    Quote Originally Posted by Brent338 View Post
    After much researching and debating, its done deal... now, the wait.
    solid build quality, and woodland camo are main factors...
    Congrats on the new hammock! You'll love the JH!

    My two primary reasons for buying the JH: solid build quality, and woodland camo

    I didn't care much for the stock suspension, and opted for the all-in-one suspension from www.whoopieslings.com and added a pair of dutch clips - works perfectly!

    /Wild
    Nature does not hurry, yet everything is accomplished...

  5. #5
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15


    DIY woopies done... pretty easy, details are in the DIY forum

  6. #6
    Banned
    Join Date
    Jul 2008
    Location
    hershey, PA
    Hammock
    Warbonnet
    Tarp
    Zpacks Cuben
    Insulation
    Cottage Down
    Suspension
    webbing/buckle
    Posts
    1,190
    Images
    51
    i spent many a night in my claytor. it was my first hammock. you'll enjoy it

  7. #7
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15
    any day now....

  8. #8
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15
    Looks amazing...

    So far I have modded the suspension and am pretty happy with it...
    My JH now sports;
    -10' DIY woopies
    - ends were gathered with a 24" section of amsteel, double fishermans, then larks head knotted to a pacific omega ring, essentially creating a solid drip point at each end of the hammock...
    -took one of the original suspension lines cut it in half and make fixed loops at each end = 5' tree straps
    -nano biners to connect... or... another option
    -2 sections of easton aluminum for marlin spikes...

    Soooo....
    I now have to figure out my ridgeline, I'm thinking something like the adj., one woopieslings makes. over the tarp of course...
    got 40' of 2mm rope, and another few feet to make soft shackle prussiks, to connect the tarp to the line and have adjustability to match/center the tarp to the woopies on the hammock.

    I made a soft shackle prussik with some of the guy line that comes with the hammock just to practice, but the 2mm will require a finer wire to create and bury the loop. I'll grab that tomorrow...

    Just need some help on what to do with the ends?
    toggle and a prussik like shug? instead of a nite ize bone knot..
    then maybe a small fig 9 on the other...
    hmmm....

    oh yeah, tarp guy lines are rigged with fact line, and fig 9's and about foot of shock cord, connected to easton spikes...

  9. #9
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15
    ridgeline done...
    28 ga. steel wire makes quick work of 2mm rope...
    40' ridgeline, 2mm, rigged above the tarp...
    2mm soft shackle prussiks, with a bead.. extra measure of holding the loop.
    and for the ends just plain old 2mm fig 9's... quick and easy.

    will be using it for the 3rd and 4th... so pics/vid?
    and the weekend after at Priest Lake... oh yeah, mackinaw on the BBQ...

    pics/vid. for sure from there, but they do it no justice....

  10. #10
    New Member
    Join Date
    Jun 2011
    Location
    Spokane, W.A.
    Posts
    15
    first MJH hang!!!

    my morning view...

    under the tarp look...

    pacific omega rings and DIY woppies

    factory straps and nano 23 biners

    love this pic


    side shot

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •