Results 1 to 4 of 4
  1. #1
    Senior Member Iafte's Avatar
    Join Date
    Mar 2007
    Location
    Williamstown, NJ
    Hammock
    DIY Wbbb Clone
    Tarp
    12x10 Cat cut DIY
    Suspension
    Ring Buckles
    Posts
    1,175
    Images
    59

    7x10 tarp questions

    I went to start making my sons tarp last night and I realized my sil is only 42 inches wide. I was planning on making it 8 ft wide but now I have to make it 7ft. I was planning on making it like the Spear winter tarp but I'm not sure now that I loose 6" per side. Do you think It will still cover enough with the cat cuts?

    It felt strange laying all the fabric out, I have not made anything since I made my 12x10 tarp. I think it burned me out but I only have a few weeks before we need it so I need to start sewing again.

    I'm also looking to make a bridge hammock, but that can wait.
    Everywhere is walking distance if you have the time. ~Steven Wright

  2. #2
    Brian's Avatar
    Join Date
    Nov 2006
    Location
    Boston, MA
    Hammock
    WBBB 1.1 Dbl
    Tarp
    MacCat Deluxe Sil
    Insulation
    Homemade Down qilt
    Posts
    373
    How steep of a cat cut are you looking to make? Even if you have a 4"-5" cut, that should still be enough material for decent hammock coverage on the sides, although not a huge amount.

    Be careful about how much material goes into the seam and any side trimming, and it should work out fine.

    Also, when in doubt, make a painters-cloth model and check for yourself! Nothing beats using $.25 a yard material before using the $6 a yard stuff.

    Brian
    OES

  3. #3
    Senior Member Iafte's Avatar
    Join Date
    Mar 2007
    Location
    Williamstown, NJ
    Hammock
    DIY Wbbb Clone
    Tarp
    12x10 Cat cut DIY
    Suspension
    Ring Buckles
    Posts
    1,175
    Images
    59
    Thanks Brian, not doing major cat cuts, and it's only $1 walmart sil.
    Everywhere is walking distance if you have the time. ~Steven Wright

  4. #4
    [QUOTE=Brian;55202]How steep of a cat cut are you looking to make? Even if you have a 4"-5" cut, that should still be enough material for decent hammock coverage on the sides, although not a huge amount.

    Be careful about how much material goes into the seam and any side trimming, and it should work out fine.

    Also, when in doubt, make a painters-cloth model and check for yourself! Nothing beats using $.25 a yard material before using the $6 a yard stuff.

    Brian
    OES[/QUOTE

    painter's cloth eh? i'll have to check it out, i sometimes use 1$/yd flannel from wm or whatever i can find, flannel sucks though.

    i would say though, forty whatever inches will make a wide tarp, but for something that will be fully closeable, i would just buy 65" sil 2nds. i almost wish i could get it wider than that because even at 65", you have to make it a pretty steep pitch to have enough height, width, and still touch the ground. you could always use 3 pieces instead of 2, this would make it considerably wider than you are planning, you could just use 1/2" ggr in the middle of the panel for the actual ridgeline.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •