Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Senior Member angrysparrow's Avatar
    Join Date
    Apr 2007
    Location
    near Memphis, TN
    Hammock
    WB Traveler
    Tarp
    ZPacks CF
    Insulation
    Te-Wa / HG / WB
    Suspension
    Whoopie Hooks
    Posts
    9,686
    Images
    92
    Quote Originally Posted by Little Weasel View Post
    Several report problems with the buckles in the cinch buckle sticky being difficult to impossible to loosen on demand.
    I remember those posts, and while I've used the Cinch Buckles extensively I've never had any of the binding problems that were reported.

    The only way I can imagine reproducing the binding is with a hammock + structural ridgeline, with the suspension pulled VERY tightly. Even then, it should certainly be possible to just lay in the hammock for a while to get just enough 'stretch' to loosen the buckles. Since a hammock suspension should not be pulled that tightly anyway, it's a moot point, IMO.

    I am pleased to know that a 'square ring' prevents the slippage with webbing. I don't think anyone had tried that before. But, since it would require the use of the outer ring of two buckles for each end, I think just using a plain cinch buckle is easier.
    Last edited by angrysparrow; 04-28-2008 at 23:36.
    “I think that when the lies are all told and forgot the truth will be there yet. It dont move about from place to place and it dont change from time to time. You cant corrupt it any more than you can salt salt.” - Cormac McCarthy

  2. #12
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,267
    Images
    35
    I was one of those complaining about not being able to loosen the cinch buckles. As others have stated, don't crank them down as tight as possible and you shouldn't have problems loosening them when needed. I have also found that even if you can't get the cinch buckles loose, there is usually enough slack in the webbing to undo the biner at the tree.
    “Light thinks it travels faster than anything but it is wrong. No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it." -Terry Pratchett



    Premium Quality, Fresh Roasted Coffee
    www.meancatcoffee.com

  3. #13
    Senior Member
    Join Date
    Sep 2007
    Location
    Dearing, Georgia
    Hammock
    Hammaka HALO SE
    Tarp
    JRB 11X10
    Insulation
    My Poncho Pod
    Posts
    349
    I have to say that the round rings on the ring buckles will allow the webbing to slip to one side or the other...thus reducing the amount of contact between the layers of webbing...thus...rendering a sometimes slow let down...other times...quite a quick let down...THUS...my reasoning for wanting the cinch buckles.

    With this set up..



    I was lowed three times to the ground...once VERY quickly...and the other two were very slowly...I think it's to with the "roundness" of the rings...duh...LOL...and the straps not being in line...I want to find another system...now this is the set up on the new No Net Claytor...my DIY set up using the two rings and the 550 cord are working just fine...no let down at all.
    Alex Williams
    Acts 10:13 "Arise Peter, Kill and Eat."
    Job 14:15 "Call upon Me and I shall answer you."
    Williams Custom Calls

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •