Results 1 to 6 of 6
  1. #1
    Senior Member
    Join Date
    Jan 2008
    Location
    Columbia, SC
    Posts
    633
    Images
    11

    Omnitape for bugnet

    I made a hammock this weekend and added omnitape to attach a bugnet. I have used the hammock only twice, but in both cases I was not very happy with the omnitape. I think it is not well suited to this application. I have not made snakeskins for the hammock yet, so I put it in a stuff sack. Since the omnitape sticks to itself, it is a hassle to separate whatever got stuck during setup. The omnitape would also fold on itself at times where I entered the hammock. This is even more tedious to undo. And my third problem is that despite the name "no snag velcro" it does still catch on some fabrics, like the running shorts I wore the second night out. I really like the omnitape for the head hole and footbox on my quilt, but I don't think it's good for a bug net attachment on a hammock.

    I think I read that other people have used omnitape for this application and I am curious what everybody's experience with the stuff has been (aside from the obvious difficulty sewing it on).

  2. #2
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,267
    Images
    35
    Omni tape (or Velcro) is fine for short runs but if it's a long distance I would rather use a zipper if possible. I have also had Omni tape stick to No eeUm netting a little bit.
    Last edited by headchange4u; 04-29-2008 at 21:00.
    “Light thinks it travels faster than anything but it is wrong. No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it." -Terry Pratchett



    Premium Quality, Fresh Roasted Coffee
    www.meancatcoffee.com

  3. #3
    yes, long runs of velcro suck for all the reasons mentioned above, it's also bulky and never lines up perfectly and takes longer to close than a zipper.

    consider a 3mm coil zipper along one side of the hammock, unzip all the way and throw the netting over the backside of the hammock when you don't need it. alot less bulky than omni tape, and far better performance for very slight weight gain.

    velcro is an absolute last resort for me.

  4. #4
    Senior Member
    Join Date
    Apr 2007
    Location
    Honduras
    Hammock
    Warbonnet Black Bird
    Tarp
    BWDD Winterdream
    Insulation
    Speer Snugfit
    Posts
    912
    Images
    14
    This is why I'm considering a hammock sock with a zipper instead of using velcro/omnitape to attach the netting. The other reason is to have a DWR bottom to keep out blowing rain. Also, a hammock sock would be movable to different hammocks, since I'm thinking when I finally start making my own I'll not be able to stop with just one design...
    Bad spellers of the world Untie!

  5. #5
    Senior Member
    Join Date
    Dec 2007
    Location
    Doraville, GA
    Posts
    947
    Images
    23
    If you pull both sides to be velcroed taut, they line up and fasten pretty easy in two or three foot increments. The hook and loop stuff catches easier than the no snag stuff and has better holding power. The hooks are a pain catching on to things.
    Youngblood AT2000

  6. #6
    a full sock will be heavier overall i think than the other two options, but you can leave it all behind when it's not bug season.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •