Results 1 to 10 of 10
  1. #1
    Senior Member KP's Avatar
    Join Date
    Jul 2009
    Location
    Outside of Atlanta, GA
    Hammock
    WBBB 1.1 Dbl; Nano 7
    Tarp
    Flat 8x10
    Insulation
    Yeti; CCF
    Suspension
    Whoopie Slings
    Posts
    335

    Help with doing a mod of the BB tie-outs

    I have a BB that is about 2 years old and I want to move the tie-outs that are attached to the net (zipper side) and move them to the body of the hammock.

    I know that I saw a post or video a long time ago of someone that moved the tie-out's but, I can't find that post or video. Seems pretty straight forward but I don't want to take a chance and ruin the bird so I'm looking for help.

    Has anyone done that mod and if so will you post the details of what I need to do?

    Thanks all. KP

  2. #2
    Senior Member bindibadgi's Avatar
    Join Date
    Nov 2011
    Location
    Canberra, Australia
    Hammock
    WBBB 1.1dbl
    Tarp
    WL Tadpole
    Insulation
    Pads, Sleeping Bag
    Suspension
    Whoopie, Dutchware
    Posts
    258
    Images
    6
    I would suggest that even if you add tie-outs below the zip, you leave the old ones there too. They are there for a good reason, which is to keep the net off your face. Tie-outs below the zip would be great for when the net is off, but when I'm all zipped in, I can't imagine being too happy with the tie-outs anywhere other than where Brandon puts them.
    It's bad luck to be superstitious.

  3. #3
    Senior Member KP's Avatar
    Join Date
    Jul 2009
    Location
    Outside of Atlanta, GA
    Hammock
    WBBB 1.1 Dbl; Nano 7
    Tarp
    Flat 8x10
    Insulation
    Yeti; CCF
    Suspension
    Whoopie Slings
    Posts
    335
    Quote Originally Posted by bindibadgi View Post
    I would suggest that even if you add tie-outs below the zip, you leave the old ones there too. They are there for a good reason, which is to keep the net off your face. Tie-outs below the zip would be great for when the net is off, but when I'm all zipped in, I can't imagine being too happy with the tie-outs anywhere other than where Brandon puts them.
    That's one of my concerns but I'm thinking that once it's zipped up the net will still pull out and away since it's still going to follow the zipper. But I don't know. Might need to experiment using temporary pull-outs. Hopefully someone that's done it or maybe Brandon himself will chime in to offer some suggestions. Thanks for your thoughts though. KP

  4. #4
    Senior Member Tendertoe's Avatar
    Join Date
    May 2010
    Location
    Columbus, OH
    Hammock
    WBRR
    Tarp
    Superfly
    Insulation
    HG
    Suspension
    webbing and rings
    Posts
    1,350
    Try Grip Clips for a temporary solution to see if you like it before you start hacking up your BB.

  5. #5
    Senior Member KP's Avatar
    Join Date
    Jul 2009
    Location
    Outside of Atlanta, GA
    Hammock
    WBBB 1.1 Dbl; Nano 7
    Tarp
    Flat 8x10
    Insulation
    Yeti; CCF
    Suspension
    Whoopie Slings
    Posts
    335
    Quote Originally Posted by Tendertoe View Post
    Try Grip Clips for a temporary solution to see if you like it before you start hacking up your BB.
    Yep, that's exactly what I'll be doing. Thankfully, I have 4 of um handy.

  6. #6
    Senior Member Corncob's Avatar
    Join Date
    Dec 2011
    Location
    Houston, TX
    Hammock
    WBBB 1.1 DL
    Tarp
    WB Mamajamba
    Insulation
    GoLiteTQ/3SPhoenix
    Suspension
    DG whoopies + MSH
    Posts
    403
    Images
    3
    I would PM ChillinOut, he sewed on additional grosgrain loops below the zipper and moves the pull-out lines using s-biners, as mentioned in this post. He may be willing to send you some pics as far as placement is concerned as well as any lessons learned.
    http://www.hammockforums.net/forum/s...073#post638073

  7. #7
    Senior Member KP's Avatar
    Join Date
    Jul 2009
    Location
    Outside of Atlanta, GA
    Hammock
    WBBB 1.1 Dbl; Nano 7
    Tarp
    Flat 8x10
    Insulation
    Yeti; CCF
    Suspension
    Whoopie Slings
    Posts
    335
    Hey thanks for the link to the post Cc. A few minutes ago I tried using a couple of grip clips and they did very well. There was a tiny bit of net sag where the net is supposed to be pulled out but totally doable and livable. Using s-biners like ChillinOut or even soft shackles to clip and unclip the net as needed would solve the minor net sag but that's just more stuff to carry and fiddle with. Anyway, I decided to let it be. At least for now. I need to get in more practice with my new thread injector before attempting to put teeny holes in the BB.

    Thanks again for the link. That's the one that I was thinking about. KP

  8. #8
    HappyCamper's Avatar
    Join Date
    Aug 2007
    Location
    WV
    Hammock
    Warbonnet BB, 1.1 single
    Tarp
    JRB11x10 Z-P cuben
    Insulation
    Yeti JRB WestMtg
    Suspension
    webbing, Dutchclip
    Posts
    3,523
    Images
    47
    Here's pics on the way I did it.

    http://www.hammockforums.net/forum/s...ad.php?t=48888

    ( sorry mods. Don't know how to create hyperlink with iPad.)
    I intend to live forever, or die trying. -- Groucho Marx (1890 - 1977)

  9. #9
    Senior Member KP's Avatar
    Join Date
    Jul 2009
    Location
    Outside of Atlanta, GA
    Hammock
    WBBB 1.1 Dbl; Nano 7
    Tarp
    Flat 8x10
    Insulation
    Yeti; CCF
    Suspension
    Whoopie Slings
    Posts
    335
    Quote Originally Posted by HappyCamper View Post
    Here's pics on the way I did it.

    http://www.hammockforums.net/forum/s...ad.php?t=48888

    ( sorry mods. Don't know how to create hyperlink with iPad.)
    Thanks HC. Nice. That's what I have in mind. Except for the attaching and detaching thing. Now to decide whether I really want to do it. Decisions, decisions. Thanks again for taking the time to post your pictures and posting the link to them. KP

  10. #10
    Senior Member Corncob's Avatar
    Join Date
    Dec 2011
    Location
    Houston, TX
    Hammock
    WBBB 1.1 DL
    Tarp
    WB Mamajamba
    Insulation
    GoLiteTQ/3SPhoenix
    Suspension
    DG whoopies + MSH
    Posts
    403
    Images
    3
    Quote Originally Posted by HappyCamper View Post
    Here's pics on the way I did it.

    http://www.hammockforums.net/forum/s...ad.php?t=48888

    ( sorry mods. Don't know how to create hyperlink with iPad.)
    Ah, I actually went in search of your post and found the other one. No wonder I was confused that there was less information than I remembered and no pictures. Thanks HC!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •