Would it be possible to tip the hammock back a bit to sit on the side for the same effect? Or would that stress out the spreader bars and stitching?
LC sitting on the side is exactly how you get in and I am sure there is a limit to what it will hold. However so far 1.9 holds my 200 pound butt up and I sit i mine.
absolutely. I sit in mine. Its a great way to face the fire and share comraderie with your buddies. I can also sit in mine using the end as a back support while I "snuggle up" with a good book. The Jacks' bridge is where I got the basic design, and with the help of Grizz and others you shouldnt have a problem making all the necessary cuts to the fabric. Mine is an hourglass shape with a parobola curve that is 40" on the end tapering to 34" in the middle (finished size after sewing channels)
good luck and god speed on your endeavors. and btw, welcome to HammockForums!
Thanks mikeinfhaz for the welcome, and thanks for the info. I'm going to have to add a bridge hammock to my project list.
What materials do you use for the spreader bar?
I can sit in my basic bridge which uses webbing as the support. The DMB uses rope and I find that to be horribly uncomfortable to sit on. My spreaders are wooden dowels with metal bolts through although I am not at all interested in weight or portability since it is my wife's hammock and her distance from the car has be strictly limited by her own requirements for camping with me.
I may be slow... But I sure am gimpy.
"Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
Mrs. Loftus to Huck Finn
We Don't Sew... We Make Gear! video series
Important thread injector guidelines especially for Newbies
Bobbin Tension - A Personal Viewpoint
I bought the tent repair poles from QUEST in the .625 diameter. Others have used wood, swiffer handles, trekking poles and other stuff. Campmor sells the fly poles for the Eureka Timberline tents and those look like they would work too. I got the brown 1.9 ripstop from Ed Speer. 1" steel rings from Ace hardware. 3/4 webbing from Quest too.
"Every day above ground is a good day"
Last edited by warbonnetguy; 08-07-2008 at 08:21.
BUT I do appreciate the slight curvature at the head end of gathered end hammocks. I can sleep on my back in those more comfortably than in my bed at home, and like doing so. The only problem is that curvature at the head usually means knee hyper-extension, but so long as I get something under my knees that's fine.
At the end of a long trail day the difference in comfort between gathered end hammock and bridge hammock is minuscule compared the difference between laying on the ground and hanging in just about any useable camping hammock.