Results 1 to 10 of 10
  1. #1
    Senior Member CatSplat's Avatar
    Join Date
    Sep 2011
    Location
    Calgary, Canada
    Hammock
    HHEA, HHEUL, HHSD, GTUL
    Tarp
    DerpTarp KL1.1
    Insulation
    TQ, DIY Fusion UQ
    Suspension
    W-Slings, Trunks
    Posts
    302

    Tips for a DIY down UQ?

    So after doing a couple bugnets/tarps I was all set to make myself a nice down TQ for my first insulation-related DIY project... and then GoLite had their sale and I bought one instead! Whoops. So I figured, hey, I've got all this downproof material sitting around, might as well do an underquilt instead!

    I had a good look at the Red River Gorge UQ guide and will be looking to follow that general design as it's relatively straightforward and had a good set of instructions.

    I do have a couple questions:

    1) Is a differential cut necessary, or even worthwhile? I will have a full-length channel on all sides, so it can be cinched up at the hammock ends with shock cord, will that eliminate the need for a diff. cut?

    2) Which way should the down chambers run, lengthwise or widthwise? The RRG tutorial indicates widthwise, but most of the quiltmakers on HF seem to have them run lengthwise.

    Any other general advice is quite welcome.

  2. #2
    MAD777's Avatar
    Join Date
    May 2009
    Location
    South Florida
    Hammock
    DIY, WBBB & Switchback
    Tarp
    HG cuben,OES Spinn
    Insulation
    DIY down 3/4 UQ/TQ
    Suspension
    Dynaglide & Dutch
    Posts
    8,542
    Images
    39
    I strongly prefer lengthwise baffles and yes, you need to sew them in so that the outer layer spacing is greater then the inner layer spacing. Therefore your outer shell will be wider than your inner shell.

    The actual spacing depends on the average thickness that you're going for, but here's an example. Lets say your inner spacing is 5" and you have 8 chambers - thats 40" of inner width plus seam allowance. Those same 8 chambers can have a spacing of 6" on the outer shell making that layer 48" wide, plus twice the baffle height, plus the seam allowance.

    Easy-peasy when you think about it!

    This differential construction will cause the quilt to wrap around you and keep you snugly warm without collapsing the chambers and compressing the down.
    Mike
    "Life is a Project!"

  3. #3
    GrizzlyAdams's Avatar
    Join Date
    Apr 2007
    Location
    Illinois
    Hammock
    DIY Bridge, v0.n, where n is large
    Tarp
    depends on season
    Insulation
    DIY UQ
    Posts
    4,628
    Images
    564
    MAD777 is always right.
    Grizz
    (alias ProfessorHammock on youtube)

  4. #4
    DivaB's Avatar
    Join Date
    May 2011
    Location
    Newark, OH
    Hammock
    DIY Extra Wide & Long Tablecloth
    Tarp
    Funky & GG Tarps
    Insulation
    DIY down UQ
    Suspension
    continuous L. Amst
    Posts
    4,099
    Yes, listen to Mad777, he sure did help me through some tough spots.

  5. #5
    Senior Member CatSplat's Avatar
    Join Date
    Sep 2011
    Location
    Calgary, Canada
    Hammock
    HHEA, HHEUL, HHSD, GTUL
    Tarp
    DerpTarp KL1.1
    Insulation
    TQ, DIY Fusion UQ
    Suspension
    W-Slings, Trunks
    Posts
    302
    Quote Originally Posted by MAD777 View Post
    I strongly prefer lengthwise baffles and yes, you need to sew them in so that the outer layer spacing is greater then the inner layer spacing. Therefore your outer shell will be wider than your inner shell.

    The actual spacing depends on the average thickness that you're going for, but here's an example. Lets say your inner spacing is 5" and you have 8 chambers - thats 40" of inner width plus seam allowance. Those same 8 chambers can have a spacing of 6" on the outer shell making that layer 48" wide, plus twice the baffle height, plus the seam allowance.

    Easy-peasy when you think about it!

    This differential construction will cause the quilt to wrap around you and keep you snugly warm without collapsing the chambers and compressing the down.

    Aaaaah, so that's what they mean by differential cut, I was thinking of something totally different involving the UQ being more narrow towards the ends. Yes, I was planning to design the channels as you'd mentioned, otherwise it would end up a really awkward rectangle shape and wrap very poorly. Thanks a bunch! Definitely starting to feel more confident about this.

  6. #6
    hammock_monk's Avatar
    Join Date
    Aug 2012
    Location
    Eugene, OR
    Hammock
    Darien UL
    Tarp
    HG Cuben Fiber
    Insulation
    Winter bag/DIY UQ
    Suspension
    whoopies/dutchware
    Posts
    313
    Images
    15
    MAD777, thanks for that explanation! Suddenly, the picture became very clear for me. I might be getting close now to my DIY UQ!

  7. #7
    Senior Member GrayDog's Avatar
    Join Date
    Jan 2010
    Location
    Orlando, FL
    Hammock
    Skeeter Beeter Pro
    Tarp
    WB Mamajamba
    Insulation
    WL3/4 - GoLite TQ
    Suspension
    Whoopies
    Posts
    361
    Images
    8
    MAD777 is the Chuck Norris of DIY hammock gear!
    hammock [ham-uhk] noun
    Man's successful attempt to sleep on a cloud

  8. #8
    Senior Member dink712's Avatar
    Join Date
    Sep 2012
    Location
    Salisbury, MD
    Hammock
    WBRR and ENO double
    Insulation
    DIY UQ
    Suspension
    straps & whoopies
    Posts
    134
    Images
    1
    good question and great answer..now maybe I will DIY an UQ...thanks!!

  9. #9
    hammock_monk's Avatar
    Join Date
    Aug 2012
    Location
    Eugene, OR
    Hammock
    Darien UL
    Tarp
    HG Cuben Fiber
    Insulation
    Winter bag/DIY UQ
    Suspension
    whoopies/dutchware
    Posts
    313
    Images
    15
    When Alexander Graham Bell invented the telephone, he had three missed calls from mad777--about DIY hammock gear.


  10. #10
    Senior Member FLScouthanger's Avatar
    Join Date
    Mar 2011
    Location
    Crestview, FL
    Hammock
    ENO Sngl & Dbl, GT UL, hk2001DL1.1
    Tarp
    DIY, GTFF, GG
    Insulation
    IX, PLUQ
    Suspension
    Straps, Rings, WSs
    Posts
    249
    But prior to the missed calls from Mr Bell, MAD77 counted to infinity...twice!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •