Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Climashield UQ

  1. #1
    GaryBunk's Avatar
    Join Date
    Jan 2012
    Location
    Bakersfield, CA
    Hammock
    Knotty design, 1.5 oz stretch side
    Tarp
    WL Tad Pole
    Insulation
    PLUQ w/IX
    Suspension
    dynaglide/straps
    Posts
    227
    Images
    17

    Climashield UQ

    I have watched Eric's video and read several other accounts of using the climashield for an UQ. Is it necessary to sew it to one or both panels (top and bottom ripstop)? I was thinking of just sewing all the channels and top and bottom together and sliding in the Climashield and using quilting yarn to quilt it. Say 3-4" in from each edge and then on 8-10" spacing to keep it from bunching? It sounds sound anyone ever try it? It seem like it would just be way easier on the sewing and leave only one end to finish. Any thoughts? I was thinking you could always rip the one end open and add more climashield and only have to re quilt it. Small job compared to a whole new quilt.
    - Gary -

    "Nice Pen, I Bet It Writes Some Really Nice Stories"

  2. #2
    Mr. Arrowhead pgibson's Avatar
    Join Date
    Apr 2009
    Location
    SW Idaho
    Hammock
    Black Bird 1.1 Dbl
    Tarp
    AHE Shangi La
    Insulation
    KAQ Prototype
    Suspension
    AHE Whoopie Slings
    Posts
    4,542
    Sewing the parimiter is far better. Climashield does not need quilting and it will separate the layers of the insulation to a slight degree. Simply sewing around the edges will secure the climashield well enough to stabilize it and keep it from shifting around. The edges will stay warm where with only the quilting it will slouch inside the quilt creating gaps and cold spots.
    Arrowhead Equipment -- For all your hanging, backpacking and Ultralight Fishing gear needs.

    Free APEX Upgrade on Every Kick *** Quilt (KAQ)

    Now Offering FlameThower Down Gear And Tenkara Fishing gear
    Arrowhead-Equipment.com
    Tenkara-Fishing.com
    Visit AHE on Facebook Follow us on Twitter
    Sign Up for Arrowhead-Equipment Gear News: Click Here

  3. #3
    MAD777's Avatar
    Join Date
    May 2009
    Location
    South Florida
    Hammock
    DIY, WBBB & Switchback
    Tarp
    HG cuben,OES Spinn
    Insulation
    DIY down 3/4 UQ/TQ
    Suspension
    Dynaglide & Dutch
    Posts
    8,571
    Images
    39
    I agree with Paul. I have sewn the entire perimeter making. Climashield quilts and they are rock solid after that.
    Mike
    "Life is a Project!"

  4. #4
    Senior Member Slackdaddy's Avatar
    Join Date
    Jun 2009
    Location
    MD
    Posts
    140
    Images
    4
    sewn the perimiter on 2 climashield UQ's,, works great

    Slack

  5. #5
    Senior Member mattyg's Avatar
    Join Date
    Jun 2011
    Location
    austin tx
    Hammock
    eno dbl wbbb 1.7 dbl,dangerbird72
    Tarp
    ugq wd 12
    Insulation
    kaq/ugq tq uq
    Suspension
    adj webbing
    Posts
    496
    I would listen to paul he made my awesome underquilt

  6. #6
    GaryBunk's Avatar
    Join Date
    Jan 2012
    Location
    Bakersfield, CA
    Hammock
    Knotty design, 1.5 oz stretch side
    Tarp
    WL Tad Pole
    Insulation
    PLUQ w/IX
    Suspension
    dynaglide/straps
    Posts
    227
    Images
    17
    Quote Originally Posted by mattyg View Post
    I would listen to paul he made my awesome underquilt
    I was afraid of that. I had hoped to just buzz out a couple of shells and then fill them with whatever CL was on sale. Figured it would be easy just to do the loops ever couple of inches to hold it in place. Has anyone done it that way?

    Thanks guys,
    - Gary -

    "Nice Pen, I Bet It Writes Some Really Nice Stories"

  7. #7
    GaryBunk's Avatar
    Join Date
    Jan 2012
    Location
    Bakersfield, CA
    Hammock
    Knotty design, 1.5 oz stretch side
    Tarp
    WL Tad Pole
    Insulation
    PLUQ w/IX
    Suspension
    dynaglide/straps
    Posts
    227
    Images
    17
    Quote Originally Posted by pgibson View Post
    Sewing the parimiter is far better. Climashield does not need quilting and it will separate the layers of the insulation to a slight degree. Simply sewing around the edges will secure the climashield well enough to stabilize it and keep it from shifting around. The edges will stay warm where with only the quilting it will slouch inside the quilt creating gaps and cold spots.
    I had noticed that you turn the CL down against the presser foot. I had wondered if you might want to sew thru maybe a 1" wide strip of RS on top of the CL?
    - Gary -

    "Nice Pen, I Bet It Writes Some Really Nice Stories"

  8. #8
    Mr. Arrowhead pgibson's Avatar
    Join Date
    Apr 2009
    Location
    SW Idaho
    Hammock
    Black Bird 1.1 Dbl
    Tarp
    AHE Shangi La
    Insulation
    KAQ Prototype
    Suspension
    AHE Whoopie Slings
    Posts
    4,542
    Quote Originally Posted by GaryBunk View Post
    Has anyone done it that way?
    Yes I have, and it does not work very well at all....hence my previous post.

    Quote Originally Posted by GaryBunk View Post
    I had noticed that you turn the CL down against the presser foot. I had wondered if you might want to sew thru maybe a 1" wide strip of RS on top of the CL?
    When sewing it we layer the clima then the shell layer ripstop ten the liner. Then pin, pin, and more pining around the perimeter to hold it all in place. The foot never meets the Clima and feeds just fine. When you make the turn (inside it out) the liner will have more space to travel to go around the edges making it smaller than the outer shell layer, creating a semi differential effect.

    Honestly having done it both ways....it's way less work than quilting loops. And is a far better, warmer and more durable quilt in the end....but hey we've only made a few thousand.
    Arrowhead Equipment -- For all your hanging, backpacking and Ultralight Fishing gear needs.

    Free APEX Upgrade on Every Kick *** Quilt (KAQ)

    Now Offering FlameThower Down Gear And Tenkara Fishing gear
    Arrowhead-Equipment.com
    Tenkara-Fishing.com
    Visit AHE on Facebook Follow us on Twitter
    Sign Up for Arrowhead-Equipment Gear News: Click Here

  9. #9
    GaryBunk's Avatar
    Join Date
    Jan 2012
    Location
    Bakersfield, CA
    Hammock
    Knotty design, 1.5 oz stretch side
    Tarp
    WL Tad Pole
    Insulation
    PLUQ w/IX
    Suspension
    dynaglide/straps
    Posts
    227
    Images
    17
    Quote Originally Posted by pgibson View Post
    Yes I have, and it does not work very well at all....hence my previous post.


    When sewing it we layer the clima then the shell layer ripstop ten the liner. Then pin, pin, and more pining around the perimeter to hold it all in place. The foot never meets the Clima and feeds just fine. When you make the turn (inside it out) the liner will have more space to travel to go around the edges making it smaller than the outer shell layer, creating a semi differential effect.

    Honestly having done it both ways....it's way less work than quilting loops. And is a far better, warmer and more durable quilt in the end....but hey we've only made a few thousand.
    So you have the Climashield on top then? I mean the presser foot rests on the Climashield then below that are the layers of ripstop and then the feed dogs? The reason I asked is that I watched a video by Eric and for someraeson his views was it gets all tangled,
    - Gary -

    "Nice Pen, I Bet It Writes Some Really Nice Stories"

  10. #10
    Mr. Arrowhead pgibson's Avatar
    Join Date
    Apr 2009
    Location
    SW Idaho
    Hammock
    Black Bird 1.1 Dbl
    Tarp
    AHE Shangi La
    Insulation
    KAQ Prototype
    Suspension
    AHE Whoopie Slings
    Posts
    4,542
    No the climashield is on the bottom. The foot will grab it if it's on top....but won't if it's on the bottom. Layer it layer out on the floor just like I said and run it through the machine the same way, don't flip or turn it.
    Arrowhead Equipment -- For all your hanging, backpacking and Ultralight Fishing gear needs.

    Free APEX Upgrade on Every Kick *** Quilt (KAQ)

    Now Offering FlameThower Down Gear And Tenkara Fishing gear
    Arrowhead-Equipment.com
    Tenkara-Fishing.com
    Visit AHE on Facebook Follow us on Twitter
    Sign Up for Arrowhead-Equipment Gear News: Click Here

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •