Page 5 of 5 FirstFirst ... 345
Results 41 to 43 of 43
  1. #41
    New Member mgabel_pi's Avatar
    Join Date
    Nov 2008
    Location
    Fairfax, VA
    Hammock
    HH HLB A-Sym
    Insulation
    REI Travelsack
    Posts
    29
    Images
    3

    The "Double Slip Knot"

    Just Jeff says (to attache the hammock rope to a carabiner):

    "Put a carabiner on the tree huggers, then just a “double slip knot” in the Spectra. It's basically a half-hitch inside a half-hitch. It holds and it’s quicker to tie and adjust than the Hennessy hitch"


    I'm not quite sure what that means. When I try to make it up, based on the picture and the words, I end up with those two loops, but one is doubled.

    I tied first a slip half hitch and then a second slip half hitch using the loop from the first half hitch. Is that correct? Again, though, I get those two loops but one is with a single strand of rope and the other is with a double strand of rope.

    In any case, this knot I've just described would seem to work just fine.

  2. #42
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    Do you know how to daisy chain a rope? Same thing.

    1. Put the first slipknot in.
    2. Put two fingers thru that first loop, to the other side of the knot, and grab a bight in the working end.
    3. Pull that bight thru the first loop and tighten the first loop onto it.

    But as long as yours holds and doesn't bind, stick with what works!
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

  3. #43
    MacEntyre's Avatar
    Join Date
    Sep 2007
    Location
    Jamestown, NC
    Hammock
    Molly Mac Gear
    Posts
    7,559
    Images
    6
    Quote Originally Posted by Youngblood View Post
    ...it isn't all about the knots you use, but the material you use those knots with as well.
    That is certainly true. It took a fallen hammock, and a lost skiff for me to learn that every hitch made to an aluminum pole will work lose and fall off. The same hitches made on stainless steel always held. When I must lash to aluminum or exotic alloys, I seize the bitter end to the standing part. I do that for all semi-permanent lashings on any material.

    Both the clove hitch and the garda hitch work well with the Hennessey support lines on Omega Pacific rappel rings. However, since the clove hitch is permanent, I will put a half hitch on top, and seize the bitter end to the standing part, just to be sure.
    "We must, indeed, all hang together or, most assuredly, we shall all hang separately." - Ben Franklin
    www.MollyMacGear.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •