Results 1 to 9 of 9

Thread: Singer 401a

  1. #1
    Senior Member GaryBunk's Avatar
    Join Date
    Jan 2012
    Location
    Bakersfield, CA
    Hammock
    Knotty design, 1.5 oz stretch side
    Tarp
    WL Tad Pole
    Insulation
    PLUQ w/IX
    Suspension
    dynaglide/straps
    Posts
    227
    Images
    17

    Singer 401a

    I have a chance to pick up a Singer 401a with supposedly a lot of attachments. The machine was left to the current owner at the passing of his grandmother very recently. I have seen pictures of it and the 3 drawer cabinet it is in and all looks to be in good shape. The grandmother was the original owner. As I said it looks to be in very good shape. I question is I have to travel about an hour away to see it so any advice and what would be a fair price for the machine?

    Thanks for any help!
    - Gary -

    "Nice Pen, I Bet It Writes Some Really Nice Stories"

  2. #2
    Ramblinrev's Avatar
    Join Date
    Apr 2008
    Location
    Milton, PA
    Hammock
    Hennessey Explorer Ultralight
    Tarp
    Hennessey Hex
    Insulation
    HH Super Shelter
    Suspension
    ring buckle
    Posts
    7,299
    Images
    101
    The 401 is a relatively common machine so some market research should turn up a current market value. IMO it is worth doing some follow up on it. Find out how recently grandma used it if you can.

    Check my quidelines post in my sig for an approach to the machine. If it was me.... I'd probably make the drive once I got the research part of it done.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

  3. #3
    Lost_Biker's Avatar
    Join Date
    Jan 2011
    Location
    Indiana
    Hammock
    DIY Digi Camo DL
    Tarp
    Maxi Tarp
    Insulation
    Underquilts Lewis
    Suspension
    Rings and Straps
    Posts
    2,090
    Images
    48
    Here's some info for you to look at. http://blog.sew-classic.com/2008/10/...ne-review.aspx
    I got in a fight one time with a really big guy, and he said, "I'm going to mop the floor with your face." I said, "You'll be sorry." He said, "Oh, yeah? Why?" I said, "Well, you won't be able to get into the corners very well."


    Underquilts.com

  4. #4
    Senior Member
    Join Date
    Oct 2012
    Location
    Near North, ON
    Hammock
    DIY Bridge db layer 1.1
    Tarp
    DIY 12'
    Insulation
    DIY Climashield
    Suspension
    amsteel/tree strap
    Posts
    620
    I can't tell you what a good price would be for it now but I picked up my 401A in the cabinet maybe 12 years ago in central Indiana for a $100. As far as I was concerned I stole the darned thing!!!

    The machine had been in a house that had a fire, machine and cabinet were undamaged but stank of smoke originally. Fortunately I was getting it from the best ever machine repair tech I've ever met. It came out of his cleaning/inspection shop running like a top and it's continued to run that way ever since including several years where I used it for earning my living!

    It's a workhorse and IMO it's worth every penny of whatever you have to pay for it!!

    And if it comes with a buttonhole attachment that fits the slant shank, I've got first dibs on it.... (you'll never need it for sewing hammock gear!)

  5. #5
    Member
    Join Date
    Aug 2012
    Location
    MidWest
    Hammock
    DL 1.4 ripstop gathered end
    Tarp
    8x10 flat silnylon
    Insulation
    DIY...soon
    Suspension
    whoopie/shackle
    Posts
    72
    I bought my 403a (and pretty much every accessory for it) a few months ago for $115 on ebay. I thought that was a pretty stellar price considering all the attachments (specifically a monogrammer...which I likely won't use but sells for ~$40 on ebay) as well as it was just a lot cheaper in general.

    I've very happy with mine and the machines are nearly identical. Price/value is up to you but if I recall correctly, the cheapest I'd seen one go for was around $150 before I got mine (haggled a bit to get them to drop the price for me).
    Last edited by jordo_99; 01-07-2013 at 11:06.

  6. #6
    Senior Member GaryBunk's Avatar
    Join Date
    Jan 2012
    Location
    Bakersfield, CA
    Hammock
    Knotty design, 1.5 oz stretch side
    Tarp
    WL Tad Pole
    Insulation
    PLUQ w/IX
    Suspension
    dynaglide/straps
    Posts
    227
    Images
    17
    The asking price was 100.00. He has had it for sale for about three weeks and still has it, but again it is listed as a 1958 singer 401a machine. I think if you are a novice and are looking for a machine for that price there are quite a few listed that are near new. Yes they are crap but again near new. The machine is in a mountain community abour 45-60 minutes away which doesn't help the seller any. I'm guessing I can get it for close to 60-75. He sent me quite a few pictures and it seem to be in very good shape. A tune-up by the commercial guy in town runs 50-60, he maintains most of the commercial machines in town. So even with a tune-up maybe 140.00 in it.
    - Gary -

    "Nice Pen, I Bet It Writes Some Really Nice Stories"

  7. #7
    Member
    Join Date
    Aug 2012
    Location
    MidWest
    Hammock
    DL 1.4 ripstop gathered end
    Tarp
    8x10 flat silnylon
    Insulation
    DIY...soon
    Suspension
    whoopie/shackle
    Posts
    72
    Sounds like a good deal if you can get it for that price and there aren't any parts that require replacement (definitely make sure you test it out first).

    If you're pretty handy, or just curious like I am, then you can probably service it yourself. I found a service manual online and could point you to it if you wanted.

    I'd never opened a sewing machine up before but with a bit of patience got mine cleaned, serviced and lubricated in about 2 hours. However, when I do it the next time it shouldn't take more than 10-15 minutes. The downside of doing this yourself is that you don't know what normal wear looks like vs worn parts...then again it's a gear driven machine so there aren't any belts to replace either.

    ...just something to keep in mine if you wanted to try and save yourself a couple bucks and if your DIY fix isn't tamed by just making gear

  8. #8
    Ramblinrev's Avatar
    Join Date
    Apr 2008
    Location
    Milton, PA
    Hammock
    Hennessey Explorer Ultralight
    Tarp
    Hennessey Hex
    Insulation
    HH Super Shelter
    Suspension
    ring buckle
    Posts
    7,299
    Images
    101
    crap but near new vs workhorse made to last

    seems like a no brainer to me. Near new crap is still crap. What are you going to do with it? Make gear? jump on it. Garment sewing... not so much but still a good machine and will probably do for most application. Fashion garment sewing? pass on it and get a really good (and very pricey) new top of the line home machine.

    That's my observation.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

  9. #9
    BIG JEFF's Avatar
    Join Date
    Apr 2012
    Location
    Elgin SC
    Hammock
    hh safari
    Tarp
    hh hex 1.3
    Insulation
    jacks nest
    Suspension
    woopie slings
    Posts
    162
    A no brainer for sure a 401a for less than $200 is a steal. Singer and most singer nuts feel the 401a was the best machine singer ever made all steel drive gears and direct drive motor no belts. This machine also has a ton of built in stitches you probably wont ever use unless your wife finds out about them. I only wish I was closer always seem to be a lot of good machines out west and upper east coast. Look on ebay I don't think you can go wrong and its a very easy machine to use.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •