Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Sep 2012
    Location
    Maryland
    Hammock
    Wal-Mart Equip
    Tarp
    GG Emergncy Sheltr
    Insulation
    DIY PLUQ/Foam/Net
    Suspension
    Amsteel/Tech Line
    Posts
    24

    Modular PLUQ with Insultex?

    I have read through the sew-'em-up and no-sew PLUQ and the IXUQ threads, and a few other threads but have not seen an answer to my question. I have seen posts where people talk about doing this, but no pictures or personal experiences with it.

    What I'm wondering, is if it would be possible to make a modular UQ, where layers of insulation could be removed or added with ease?

    I was thinking, PLUQ with snaps that attach to a layer of Insultex. Then the Insultex would have snaps that attach to a second layer of Insultex, etc., etc.,..

    Would snaps install easily in Insultex or would the material just rip? Cutting the different layers of Insultex to longer than needed dimensions could allow for natural baffling - snaps could span 48" but Insultex could be cut to 50" to allow for 2" of wrinkles/baffling/prevent compression.

    Anyone try this?
    Attached Images Attached Images

  2. #2
    Brute1100's Avatar
    Join Date
    May 2012
    Location
    South Texas
    Hammock
    WWM or tablecloth
    Tarp
    SuperFly
    Insulation
    shamu 40*
    Suspension
    UCR whoopie
    Posts
    2,510
    Images
    1
    Seems like it should work... Insultex is cheap enough, get after it...
    Live, Laugh, Love, if that doesn't work. Load, Aim and Fire, repeat as necessary...

    Buy, Try, Learn, Repeat

  3. #3
    Fish<><'s Avatar
    Join Date
    Aug 2011
    Location
    Yigo, Guam
    Hammock
    DL1.1XLC/ BIAS WWM/ DIY
    Tarp
    HG Cuben/ DIY
    Insulation
    N/A
    Suspension
    depends...
    Posts
    1,165
    this has been done. I don't know about snaps on the inside, but some leave one end open so they can add to and take away insulation when necessary. I have done something similar once. I used a second pl when I went camping on the inside of my no sew, but it was too heavy for the 1/8 shock cord and I really had to tighten it up alot to get a decent seal on the hammock. It was functional but not ideal.

    My current version is the dejoha sewn pluq without ix. I use it inside with my td stand. I am about to get a AHE Jarbidge (similar dimensions at half the weight and bulk) for camping when I get off of vacation in a few weeks. That way I have a uq for all the way down into the 20*s more than likely.

    Good luck with your project. The worst thing that could possibly happen is not succeding. hopefully you get some good replies with this thread....
    "We do not go to the green woods and crystal waters to rough it, we go to smooth it."- G. W. Sears

    My forum name is Fish<><; I'm in the navy; and I hate sleeping on the ground. If I didn't need ground to walk on or measure resistance to, I think I could happily give it up.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •