Results 1 to 3 of 3
  1. #1
    stevebo's Avatar
    Join Date
    May 2009
    Location
    Moreland Georgia
    Hammock
    WBRR, bluebridge grizz bridge,
    Tarp
    cloudburst
    Insulation
    lynx
    Suspension
    wb straps
    Posts
    1,511

    top quilt shell by underquilts.com

    Hey guys, I bought a top quilt shell from underquilts.com. When the package came in the mail last week, I was pretty excited about it---I ripped open the box, and carefully inspected the stitching and baffles. I found the quality to be very good---nice close stitching, very precise, very nicely done. (much better than if I had made it!) Then came the down part of the project. I had trouble stuffing the down, but it was a problem on my end, not the quilt itself. Last summer I experimented with putting pockets under a hammock, and using down stuffed pillows for insulation. It worked ok, but I've since decided to go with the traditional UQ as bottom insulation. So, I had some down stuffed pillows just laying around the house for no particular reason ! When I made the pillows, I used wilderness logics as my down source, and it was a piece of cake to stuff them. The anti static plastic pouches of down were very easy to use, especially when fronkys down method was used. (definitely the way to go as far as Im concerned) So, I didnt think it was going to be a big deal to take the down out of the pillows and place it in the top quilt shell. (I was totally wrong about that--it was awful---down every where---next time I do down , it will be with the little plastic pouches from wilderness logics---so much easier!)

    The other problem I had was with sewing up the side of the quilt--again my issue, not the top quilts fault! Not having ever done this before, I just started at one end and sewed it all shut---and then noticed that the baffles didnt line up! So, I took out that row of stitching, carefully lined up the baffles, and sewed it again.

    Over all, I am very pleased with the end product--its warm, pretty light, looks great, and after taking the senic route and making a few mistakes, it was pretty easy to finish. I'd do it again, with out all the mistakes on my end! When all is said and done, it probably cost me about a hundred dollers less than a comprable top quilt from another cottage industry. ( it made sense for me, especially since I already had the down from another project)

    A couple of other neat things about doing it your self--you can customize it a bit, by overstuffing the baffles in the areas where you need it. (my torso gets cold, so I added more down in that area)
    I use a ridge runner bridge hammock, and I noticed that with that narrow of a hammock, and the width of my new TQ, the quilt didn't drape as much as it should---it kind of bunched up instead of laying flat. So.........what I did was take the quilt by one edge, shake all the down to the other end, and sewed a line of stitching about 4 inches from the edge. (closing the baffle 4 inches from the edge) Then I did the same thing on the other edge. This puts more down in the center part of the baffle , and gives me a 4 inch cloth flap on the edges (kind of like a "draft stopper" flap on a Ray Jardine quilt) ---This made a huge difference in how the quilt lays in the ridge runner. (might not be the best idea for everyone, but workd out well for me, as a tall thin person who primarily sleeps on his back in a bridge hammock!)
    I sewed the bottom of the foot pocket shut, cinched up the drawstring and I was ready to go!
    In summery, I really like this topquilt---it works great, and I would do it again! Great customer service, and a great end product!
    Last edited by stevebo; 02-23-2013 at 06:19.
    “The two most common elements in the universe are hydrogen and stupidity.”
    Harlan Ellison


    Do not walk behind me, for I may not lead. Do not walk ahead of me, for I may not follow. Do not walk beside me, either, just leave me alone.
    --unknown

  2. #2
    Member Lifeguard326's Avatar
    Join Date
    Apr 2009
    Location
    South Bank of the Ohio
    Hammock
    WBBB
    Tarp
    DIY Catcut
    Insulation
    PLUQ
    Suspension
    Whoopie
    Posts
    64
    Did you get any pics durring your FIY? Have been thinking of ordering from them.
    Acta non Verba

  3. #3
    Senior Member bowl-maker's Avatar
    Join Date
    Jul 2012
    Location
    Knoxville, TN
    Hammock
    Hennessy Explorer UL
    Tarp
    DIY Winter Dream
    Insulation
    DIY UQ/JCP TQ
    Suspension
    WS/MSH
    Posts
    398
    Images
    24
    the method I have. been using for harvesting down from a repurposed source is this:

    using a vacuum put down-proof netting of some kind over the main hose with a rubber band (I used $1/yd chiffon scrap from walmart). then attach an extension to the hose. vacuum down from your source until it stops sucking and then turn off the vac. after the vac stops running pull the extension off the hose, push the down in a bit with your finger (to get itvaway from your mouth), put it in the baffle as far as possible and blow the down into the baffle.
    some points to note: be careful about inflating the baffle when blowing the down. I found that when I tightly sealed the fabric around the extension and blew a lot of down that the baffle would inflate and then it would blow the down back out the extension when I finished. also be careful not to inhale down when blowing...that is why I pack it down with my finger hefore blowing.

    I end up with very little stray down using this method.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •