For I consider that the sufferings of this present time are not worthy to be compared with the glory that is to be revealed to us....that the creation itself also will be set free from its slavery to corruption into the freedom of the glory of the children of God. For we know that the whole creation groans and suffers the pains of childbirth together until now.
Wonder what the result would be if you had your suspension line go over the top of the car, down and into a far side open window, through the car, and out the window on the near side? You'd be using the top of your car as a support, and you'd have to put a cloth or something to keep the line from rubbing the top of the car and first window I suppose... think a car top is structurally sound enough for this sideways pulling? Not recommending this, btw, just curious about the forces involved.
I wish I could get dejoha to illustrate this for me.
"Civilization is the limitless multiplication of unnecessary necessities." - Mark Twain
“I go to nature to be soothed and healed, and to have my senses put in order.” - John Burroughs
I vaguely remember someone posting a picture of a rally car that had a hammock hung on the side of it. Anyone else remember this? I'm going to see if I can find it and post a link to it.
I am going to try a set of aluminum oars for the posts. I have two aluminum kayak oars, each breaks into two pieces and each oar has a paddle on each end. The oars came as part of an inflatable kayak and I think they are cheap. I took the paddle off of one end and the 40 inch long piece weighed 10oz. I would remove all the paddle ends. The pieces slide together overlaping almost 3". The total pipe length, without paddle ends, is about 72". Weight for one post would be 20oz., and for the two posts, 40oz. but based on what others have said here, I think I can cut the posts shorter reducing weight. Also, they would be easier to carry shorter. If it works I will post pictures.
I remember this hang, Cakes! A desperation setup after midnight
"Life is a Project!"
Don't have any pics but I've done it to the roll cage of my Jeep before.