Results 1 to 2 of 2
  1. #1
    Senior Member SteelToe's Avatar
    Join Date
    May 2012
    Location
    Texas
    Hammock
    UCH 2.0 Prototype
    Tarp
    Hex-Cat Tarp
    Insulation
    UCH UQ/TQ
    Suspension
    Adjustable Slings
    Posts
    161

    Quilt Construstion Question

    Ok, so I've got the liner side of my UQ cut out, I've sewn one side of the baffles to it, and I've got the side-strips sewn on as well. I will attach the baffles to the outer layer starting at the middle and working outward.

    But when all that's done, what's the best approach to sew up the perimeter of the outer layer? Because of the baffles you can't turn the thing inside out after sewing a felled seam. Or is there a way to make the felled seam from the outside?

    TCB
    "We sit together, the mountain and I, until only the mountain remains."
    -Li Po

  2. #2
    Senior Member FLScouthanger's Avatar
    Join Date
    Mar 2011
    Location
    Crestview, FL
    Hammock
    ENO Sngl & Dbl, GT UL, hk2001DL1.1
    Tarp
    DIY, GTFF, GG
    Insulation
    IX, PLUQ
    Suspension
    Straps, Rings, WSs
    Posts
    249
    For the UQs I've done I never used a felled seam. I either just sewed the top to the bottom (and ensured the noseeum was also sewn down) since grosgrain was going to be added later, or just did a rolled hem. YMMV.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •