Originally Posted by saustin1967 Have been using a set of these for over two years now. Cut the metal parts of, leaving the sewn in loop and either run a climb rated biner or more recently I made up some Amsteel soft shackles though the loop that have been working great. http://www.harborfreight.com/set-of-...aps-67386.html Two years on the same set no sign of fraying or wear. Very solid, made of poly so no/little stretch. That's what I use. Great bargain for $4, and they work well. I also use them (with metal parts) to secure kayaks.
Time is but the stream I go afishing in. Henry David Thoreau
Gary at strap works can make you anything to order... He is amazing!! He did some 1" to 2" back to 1" conversions that were the cat's meow.
~~~~~~~~~~~~ AT '12. AT '14. FT '15. CA '15.
Originally Posted by nothermark I think you will also find a lot of folks use these: http://www.harborfreight.com/set-of-...aps-67386.html About par with the super light Dyneema suspensions. I'd go over to Gary at: http://www.readystrap.com and see what he can do. ;-) +1 .....on every single hammock I own or make. I cut the cam buckles off and stitch a large eye.
KCCO
Forum Rules
Bookmarks