Results 1 to 7 of 7

Thread: hammock design

Hybrid View

  1. #1
    New Member peterb's Avatar
    Join Date
    Mar 2007
    Location
    botley, southampton
    Posts
    12

    hammock design

    Hi to all... I have made my first ever hammock and it works (thank god,lol).
    but i dont think the setup is quite right, i found that it does not hug me very well, its tight under my back but loose on the sides. is this common. any tips on setup. . thx

  2. #2
    Senior Member
    Join Date
    Feb 2007
    Location
    Alabama
    Posts
    474
    When you say tight on your back, does it hurt or uncomfortable on the bottom?

  3. #3
    Senior Member lvleph's Avatar
    Join Date
    Feb 2007
    Location
    RVA
    Posts
    717
    Images
    9
    It depends on the type of end gathering method. I used the HH-style roll and I don't get too much of a hug. A lot of people don't want it pressing against their sides. The very side will be a little flappy. You could add tie outs to pull them away from you.

    EDIT: I guess I might have misunderstood what you meant by hug. Are you referring to the way it cradles your back, or your sides? Also, what are the dimensions?
    Last edited by lvleph; 03-30-2007 at 09:22.

  4. #4
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,267
    Images
    35
    Check out Jeff's site for a couple different whipping techniques. The standard whipping method will take the slack out of the sides.

    http://tothewoods.net/HomemadeHammock.html
    “Light thinks it travels faster than anything but it is wrong. No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it." -Terry Pratchett



    Premium Quality, Fresh Roasted Coffee
    www.meancatcoffee.com

  5. #5
    New Member
    Join Date
    Nov 2006
    Location
    above ground
    Posts
    6
    I've been experimenting with whipping over the winter...find that, when making a test hammock, not cinching the side material gives you a better diagonal sleeping configuration. The sides are floppy if you lay right in the middle, but if you shift diagonally, the sides hug you, you get a 'flatter' sleeping platform, and a better night's rest.

  6. #6
    Senior Member
    Join Date
    Oct 2006
    Location
    New Orleans, LA
    Posts
    3,565
    Images
    57
    That is really common when you gather hammock. Pull the edges about 2-3" more than the middle. This will tighten up the sides. You might have to do this a few times to get the feel right. Too much with make the hammock uncomfortable and hard to use.

    As someone else said, Jeff's site has some good info on this.
    Is that too much to ask? Girls with frikkin' lasers on their heads?
    The hanger formly known as "hammock engineer".

  7. #7
    Senior Member Just Jeff's Avatar
    Join Date
    Oct 2006
    Location
    Charlottesville, VA
    Hammock
    Blackbird
    Tarp
    MacCat Standard
    Insulation
    Winter Yeti, MWUQ4
    Suspension
    Whoopie Slings
    Posts
    8,012
    Images
    32
    My experience matches saimyoji's - I just let it flop, but when I get diagonal it doesn't flop onto my face or anything.

    Also, hanging with more sag can make the edges floppier. Hang it straighter and the edges will tighten...but it'll restrict how diagonal you can get. Just play around with it and you'll figure out what sag/floppy side combo works for you. That's the great thing about homemade gear - you customize it to fit exactly what you like.
    “Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them.” ~Judge Joseph Story

    - My site: http://www.tothewoods.net/
    - Designer, Jeff's Gear Hammock / Pack Cover by JRB

    IMPOSSIBLE JUST TAKES LONGER

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •