Join Date: Dec 2010
Location: Knoxvillle, TN
Hammock: Hennessy Ultralight, modified
Tarp: HMG Hex Tarp
Insulation: Zpacks down 40 deg
Suspension: Dynaglide UCR
Bishp bag from repurposed Thermarest bag
The title should read "Bishop."
I suspect I am not the only one who cannot get my thermarest back into the bag is comes in. So I have several lying around.
I had the idea to use one as a Bishop bag for my hammock. It turned out to be a very good idea. The end has a little hand hold that makes a perfect pouch for the end of the suspension for that end of the hammock.
I took my soldering iron a burned a small hole under the pouch.
Check the pictures.
Last edited by colonel r; 05-31-2012 at 11:50.. Reason: spelling
Join Date: Jun 2009
Location: Santa Barbara
Hammock: TTTG / BIAS / WL / WB
Tarp: HG Winter Palace
Insulation: HG Fluff
Might not be a bad idea to glue or stitch a heavier fabric patch over the hole and re-solder. It's been my experience that the little hole on it's own will tear into a big one.
Looks good though.