Join Date: Feb 2011
Location: Sarasota, FL
Hammock: Warbonnet BB1.1
Tarp: Suprfly/MacCat Dlx
Insulation: 3-Season TQ/UQ
Suspension: Adjustable Webbing
I was reading some past posts and started thinking... If I was running dedicated CRLs for each tarp, would I need an S-biner to connect my prussics to my tarp? What if I just eliminated that extra bit of hardware?
Also, is shock cord considered a good choice for use as the aforementioned prussics? They were considered a while back and I was wondering what the current thoughts might be on them.
Join Date: Jan 2011
Location: West Virginia
Hammock: WBBB, D.I.Y. KSSH
Insulation: H.G. & Warbonnet
Suspension: Whoopies & Dutch
If your talking about using shock cord for a prussic knot, I'm not sure how that would work out. I would think that after it is put under allot of tension it would be a bare to move or loosen.
opie's soft shackle prusik is what i use.
>_please add your name to the world wide H F member location list_<
" just jump in where you can and hang on!" - briscoe darling