Join Date: Feb 2010
Location: Detroit, Mi
Hammock: 3xWBBB1.0dbl, XLC, DIY
Tarp: superfly, maccat d
Insulation: DIY UQ/TQ/UGQ/HG
Suspension: whoopies, E.trunks
SOLD: FS/WTT: DIY down UQ, DIY hammock Sock
I've got a couple things for sale.
DIY UQ - i made this under quilt specifically for a HH hammock. it has side pull outs that are on 6" adjustable velcro strips but i didn't always use them as some times the ground was too hard to stake into. i also incorporated a center access which uses velcro to seal. to be honest, i used this feature twice and then i got the 2QZQ mod2.
here are the material specs for the UQ
o 5 yds 1.1 camo ripstop nylon DWR
o 7 cord locks
o 24’ 1/8” shock cord
o 80” 3/32 shock cord
o 2 mitten hooks
o 2 yards no-see-um (only to get the length, did use all of it)
o 40” Velcro
o 28oz 650-700 goose down
overall length is about 78", the shoulders 48" wide and the foot end is about 40". i've slept in the UQ down to -5F without a problem but I was also smart with my set up location.
total weight in sac is about ~34oz
I'm asking $200 shipped using paypal. If it's outside the CONUS, I will need to check shipping first.
the second is my DIY sock made specifically for a RHS HH mod 2. I think the new HH zippers are on the left so unless you have a mod2 i'm not sure this will work.
- the top layer is a breathable 1.0 ripstop
- bottom is a 1.1 downproof (nonbreathable) ripstop with a single of IX on the inside with two draw cords.
- draw cords at each end
weight is 11oz in sac
I'm asking $140 shipped using paypal, If it's outside the CONUS, I will need to check shipping first.
here is a youtube link showing both and some photos'
http://smartoutdoors.webs.com/ elephant trunks, tarp keys and crosses
Last edited by bloomgorge; 09-07-2011 at 14:00.. Reason: add text to title