Join Date: Mar 2012
Location: Berea, Kentucky
Hammock: WB BlackBird DL 1.1, HH Scout
Tarp: Modified Chinook
Insulation: UQ Incubator 20'
Suspension: Dutch & WBBB setup
Modded Chinook Tarp
Modded my 12 x 9.6 Chinook Tarp for my WBBB Hammock. It kinda morphed from one idea into many and before I knew it it took me a week to complete it. I have a few pics of the build and a video walk around at the end. Here goes:
First thing I did to the tarp was sew webbing over the metal grommets at the center tie out points at the ridgeline. Added a key ring to attach zing-it with Prusic Knots to tie up the tarp to the ridgeline (above the tarp).
Zing-it continuous ridge line with a Dutch hook on one end and tarp flyz on the other end.
As you most of you know the bottom metal grommets are not at all centered correctly so I ended up making my own tie out points with webbing sewed to reinforced material on the tarp (glued and sewn in place). It also at these points allowed me to create doors. On the right closed, left open.
The doors I decided to sew on velcro, works very good. I ended up tying them to the ground with a stake also so they dont blow around in the wind.
The side pullouts were another creation (not my own). Measured and reinforced inside and out with heavy material glued and sewed in place with a plastic loop.
I had a bunch of quilt hooks from Dutch left over so I decided to use them for this since they are easy to install and remove. Basically you can see for yourself in the pic how its routed. Starts at one corner of tarp ridgeline, thru the side tarp tie out to the walking stick on a key ring, thru other side tarp tie out to the other end of the ridgeline. (sorry for same pic)
Then I have Jacks R Better self tensioning guylines at all points on my tarp and walking sticks to pull out the sides and keep it tight all night. Even made my own self tensioning rings out of a poly material, really strong and light weight.
Basically what all this does on the sides is give me tons of room on the inside. Here is a shot of just the right side pulled out and left just staked out like normal.
Here is both sides pulled out. Gives it almost a cabin look LOL
Heres my Hammock inside
Look at the room
This is where I was at that made me want doors, very cold that weekend (20 miles over two days with the boy scouts). It did break the wind and kept me nice and toasty.
32' when we got there, 23' that night. Boys slept in the cabin with the fireplace.
Me and my Hiking/Camping buddy Sam. Yea, he was a little cold too so we put on one of my sons jacket, he loved it
Here is the video I made of the tarp, hopefully its alright. Any questions just ask.
Last edited by camoxjeep; 01-16-2013 at 22:09..
Join Date: Dec 2012
Location: Southwestern, PA
Hammock: Eno Dn, Sn, DIY "Ahote"
Tarp: DIY soon
Suspension: Whoopie and straps
Terrific... Guess ill be modding my Chinook now..
What size is the one you have? Think this could be done with the 12x9?
Again it looks great.
Thanks for sharing.
Looks like a great job done... It should give you many years of service...
Live, Laugh, Love, if that doesn't work. Load, Aim and Fire, repeat as necessary...
Buy, Try, Learn, Repeat
Join Date: May 2010
Location: Columbus, OH
Suspension: webbing and rings
I did some of the same mods on my 12x14 Chinook (added webbing to all tieout points and added side pullouts with Grip Clips), but you kicked it up a notch.
in it for the naps
Join Date: Aug 2009
Location: Checotah, Oklahoma
Tarp: GargoyleGear Ogee
Insulation: UQ-varies w/season
Suspension: onrope buckle
I'm curious as to your reasoning for running your tie outs through the panel pulls to the ridgeline? What does this accomplish?
It has always been my private conviction that any man who pits his intelligence against a fish and loses has it coming.
By running the line through the tie-out and up to the end of the ridgeline, the force is outward as before but also AWAY from each of the tie-outs. This should result in putting tension on the fabric between the tie-outs.
It would be interesting to setup the tarp with one side done conventionally and the other using this method to make a comparison.
"Life is a Project!"
Join Date: Sep 2011
Location: Modoc, SC
Hammock: HHDJ/Speer/T-Bird/WBBB/Lite Owl
Suspension: Cinch Straps
Very nice, and I will have to try putting my lines through the panel pulls and then to the ridgeline. I noticed this past weekend how I had a sag between the panel pulls.
You cannot solve a problem with the same mind that created it. -Albert Einstein
Thank you BajaHanger!
"Life is a Project!"