Essential Outdoor Knots, according to Rat!
About seven years ago I posted this list of Essential Outdoor Knots on the Hammockcamping Group, a little later I posted it again here on hammockforums.net. As this topic comes up pretty regular I decided to make an article of it and update all the links from the original topic.
My Grandfather taught me tons of knots. He was an old time honest-to-goodness cowboy and outdoorsman and he never ceased to amaze me at the number of things one could do with the right rope and a good knot. I can tie about 30 knots from memory, but the Essential Outdoor Knots are those that I find myself using most often and teaching to others who are along for their first trip. Generally they are easy to tie, easy to untie and have multiple uses.
I have over the years added and subtracted various knots, replacing them with similar knots that are either easier to tie or untie, but serve the same purpose. I now call the list "10 Essential Knots for the Outdoorsman". With an addendum to a few other notable knots!
10 Essential Knots for the Outdoorsman
End knots: End knots are tied in the end of a cut rope to keep it from fraying. Whipping, melting or back braiding is considered superior, but when time is of the essence, these knots will do the trick. They may also be used for 'stopper knots'. Used primarily to stop the bitter end of the rope from slipping past a primary knot (for safety's sake), but also used to stop the rope at a certain point when using a pulley or for measurement.
Ashley (Oysterman's) Stopper
Loops: Or knots that form loops, are very numerous. Even the old standby, the Bowline, has many (5?) different variations. Some are better tied into the end of the rope and some are better in the middle (span) of the rope. The bowline and figure eight have variations for both needs. I leave off the 'Figure Eight on a Bight' for a reason. This is one of my favorite knots, cool to tie and it looks good lying along the rope when it is tied. But after it is loaded it can be a real bear to untie. So it gets an honorable mention, but that's it.
Bowline on a Bight* Honorable mention, the bowline on a bight is a great way to make a hande in order to drag something, like a heavy log, or to make shoulder straps for pulling an injured person on a sled. It doubles the area of contact at the loop causing less hand pain and more purchase.
Alpine Butterfly (Linesman's Loop)
Bends: For joining two ropes, or the ends of one to form a loop.
Double Fishermen's Bend* A variant of the Ashley Stopper described above.
Sheet Bend and Double Sheet Bend
Adjustable knots: like the Drivers' (Trucker's) Hitch and the Midshipmans' Hitch are worth their weight in gold.
Trucker's/Driver's Hitch This hitch has many names, but this is the only way to tie it properly. You can also double wrap the bitter end to get a better mechanical advantage. Once wrapped three times or so the rope will generally grab and hold itself while you finish the half hitches, very handy.
Midshipman's Hitch (Taught Line) This hitch also goes by many names, tent-line, tight-line and adjustable hitch ar just a few. It is actually a rolling hitch variant. The same hitch tied to a spar is a Rolling Hitch. Adding wraps under the half hitch will help it grab slick rope better, adding wraps above the half hitch will help it grap slick spars better.
Prusik Hitch* Honorable mention: Technically a slide and grip hitch, but it has many uses around camp.
Exploding Hitches: I use the Mooring Hitch and the Highwayman all the time. Very quick and easy to tie and untie. While I have used the Exploding Clove Hitch to suspend my hammock, I don't recommend it. The Mooring Hitch can be used to suspend a hammock as it is a sliding (adjustable), locking hitch that is easy to untie (exploding). The Exploding Clove Hitch is less reliable, but good when you need a quick grab on a line that will have steady tension on it. The Highwayman Hitch is great for hanging stuff from the ridgeline, like stuff sacks, or anything else you can add a short piece of cord to.
The Slipped Buntline Hitch is the best way to attach guylines to a tarp that I have found. Once you learn to tie it the easy way you will find yourself using it in all kinds of places!
Tumble Hitch* More secure than the Highwayman's Hitch.
* Honorable Mention*:
Slackers: Rope too long? Don't cut it, use these handy hitches to take up that slack.
Chain Sinnet (Monkey Braid)
Clove Hitch* Excellent for holding the tarp side up when used in conjunction with a trekking pole or stick. Easy to adjust up or down as well, just pull a little slack and slide the whole thing. I have also used it to pitch my hammock with just the trekking poles although I used extra guy outs to stabilize the poles.
Zeppelin Bend A good bend, but make sure to tie it correctly! I like the Sheetbend/Double Sheetbend for the easier tie up; but the Zeppelin get the nod if heavy loads are involved.
Klemheist Hitch A great slip and grip hitch but, it only grips in one direction; for this reason I like the Prusik, which grips in both directions, better.
Notable Knot Resources:
Animated Knots By Grog
Roper's Knot Page
Notable Knot Index
How to pronounce 'bitter' and 'bight'; it is bitter as in 'it tastes bitter' not as in bite like a 'dog bite'. However, a 'bight' in a rope is pronounced like 'bite'.
The 'standing part' or 'standing end' is the load bearing end or section of the rope.
The 'bitter end' is the free end.
a 'bight' is piece of the standing or bitter end that is doubled.
A loop is a bight that has been crossed over (overhand loop) or under (underhand loop) to form a loop.
All knots employ the various terms above during tie up.
Another thing is to make sure you 'dress' the knot. That is to make all the various loops and pieces straight, neat and tight, also called setting the knot. A pretty knot is a strong knot!
I once talked to a guy about using the gizzies on ropes and his thot was that it is better to use something like the figure 9 or double buckle because it has a higher breaking strength than a knot. This is a misconception because ANY turn, bend or loop in a rope, whether in a knot or on a friction device causes the same weakening. The loss of strength comes from the fibers being unequally burdened in the radius of the turn. IOW, fewer of the fibers are taking the load and this happens when you tie a knot or you a friction/clamp device that uses ANY bend,turn or pinch point in the rope.
Also, if you have two knots in a rope the weaker knot is the rating to use. For instance: knot A has a retention of 75% of breaking strength, knot B has a retention of 50% of breaking strength. The new load rating is 50% of the breaking strength, not 75%. However, tying multiple knot b's into the rope just lowers it by 50%. Let's say we have three knot b's in a rope, the rope has a SWL of 100 lbs, the new SWL is 50 lbs, not 12.5 lbs. Either way it's 50%, no matter how many you have tied in the rope.
Bowline and Sheetbend not the same knot; here's why...
"I aim to misbehave." - Capt. Mal Reynolds
Mind of a Rat Youtube Channel
Last edited by Rat; 04-03-2013 at 19:26..
|alpine, bowline, butterfly, clove, essential, hitch, knots, line, outdoor, prusic, rolling, taugh|