It didn't catch on with me because I was using it to augment a SS and then I got side tracked with top loading hammocks and a PeaPod and then a JRB BMBH with MWUQ. But, I thought it was working pretty darn good in the SS and had originally planned on testing at much colder temps than the high teens, which is the lowest I used it. I just didn't have enough cold temps to test my down gear and HHSS with GI.
Please do keep us posted. If not using a HHSS, how about something that you could adjust after you got in the hammock, or is that what you have already, or are planning? That way you could get in and then pull the insulation snug against your back. Just a thought.Not yet. As it is right now I just have draw cord channels on all the edges; I iteratively adjusted the end ties this morning, but I have some elastic I can put through the channels to test that approach.
It did occur to me to try some draw cord holes in the middle of the long edges. If you follow the link to Ray's "Previous Information", he routed a draw cord pull from the foot up along the ridge line. That didn't appeal to me, so I want to see if a center - accessible draw cord would be workable and convenient.
I'll keep y'all posted.
Edit: Think I'll go ahead and add corner tabs while I'm at it...
Bookmarks