Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,367
    Images
    3

    Anyone interested....

    In a tensioner made out of tubing like Thera Band......

    But one that is not affected by cold?

    This would be for guy lines....

  2. #2
    Senior Member sclittlefield's Avatar
    Join Date
    Sep 2008
    Location
    Northern woods of Maine
    Hammock
    It's a Secret.
    Tarp
    BWDD Winter Dream
    Insulation
    Crowsnest
    Suspension
    Slings
    Posts
    1,431
    Images
    95
    Yup yup. Mhmmm mhmmmm.
    DIY Gear Supply - Your source for DIY outdoor gear.

  3. #3
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,367
    Images
    3
    Its looking promising sc.

    I took a 6" piece of it and stretched it to around 24" and it didnt break. IN FACT, I think it improved its stretchyness. I was able to get the force up just over 4 pounds.

  4. #4
    Senior Member
    Join Date
    Feb 2009
    Location
    Beaver Co. , PA
    Hammock
    warbonnet BB
    Tarp
    Maccat deluxe
    Insulation
    sleeping bag, & TQ
    Suspension
    amsteel, treehuger
    Posts
    245
    Images
    1
    sounds good.

  5. #5
    Senior Member sclittlefield's Avatar
    Join Date
    Sep 2008
    Location
    Northern woods of Maine
    Hammock
    It's a Secret.
    Tarp
    BWDD Winter Dream
    Insulation
    Crowsnest
    Suspension
    Slings
    Posts
    1,431
    Images
    95
    I think 4lbs is actually pretty ideal for guy lines. It doesn't sound like much, but I bet you'll find it's more than you think.
    DIY Gear Supply - Your source for DIY outdoor gear.

  6. #6
    Senior Member SmokeBait's Avatar
    Join Date
    Sep 2009
    Location
    Defiance, Missouri
    Hammock
    Warbonett BB 1.1 DL
    Tarp
    BWDD Winter Dream2
    Insulation
    Winter Crowsnest
    Suspension
    whoopieslings.com
    Posts
    1,337
    Definitely interested. I camp quite a bit in the winter months and would like to put something on the Winter Dream I have on order. Was going to (not by choice) got the shock cord route. Like the looks and compactness of the Theraband system but need them to be able to work in the cold and windy days we have here.

    stumo

  7. #7
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,367
    Images
    3
    Well... stumo... You are in luck.

    Heres what I did.

    I mocked up 2 guy lines and stretched them out on a length of wooden dowel..



    Then dialed the freezer down...



    And placed the test stick in the freezer overnight.

    Got up this AM and pulled it out and as quickly as I could, pulled both lines off the dowel. The Thera Band line stayed stretched out for about 4 seconds, then wound itself up into a snake like thing...



    And about 5 seconds later looked like this...



    After which time it regained its elastic properties.

    All the while, the one with the Silicon tubing returned immediately to its relaxed position and retained its elastic qualities just like before I put it in.

    Some specs...

    SilconŽ Silicone Tubing
    The most outstanding property of SilconŽ is its resistance to temperature extremes. These, plus its good electrical properties coupled with the ability to self-extinguish, makes SilconŽ an excellent choice for appliance and computer applications. Peroxide-cured SilconŽ contains no sulphur or other acid-producing chemicals, thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is extremely resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps for SilconŽ as sharp barbs or unlined metal clamps could tear into the wall and possibly cause a failure. SilconŽ is not recommended for implantable or in-body uses or for continuous steam applications. SilconŽ may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Translucent natural color for visual contact with the flow. Resilient, stretchable, and resistant to compression set. Odorless, tasteless, and inert. Good electrical and weatherability properties — resists U.V., ozone, gases, and moisture. Not for use with fuels. Listed by the National Sanitation Foundation (NSF 51). Temperature range -100° F to 500° F. Meets FDA standards. Not for use with fuels. SilconŽ is a registered trademark of NewAgeŽ Industries
    I have a new type of zip tie coming to try out because the traditional tie I think would eventually create a failure in the tubing.

  8. #8
    Senior Member tlbj6142's Avatar
    Join Date
    Jun 2008
    Location
    Columbus, OH
    Posts
    196
    Quote Originally Posted by opie View Post
    I have a new type of zip tie coming to try out because the traditional tie I think would eventually create a failure in the tubing.
    Why not just larkshead the ends of the tubing onto the cord just above/below the knots? You just need to put a small hole in the side the tubing and then turn it over on itself. That's how the pouch on a sling-shot is attached to the tubing. That's how I have the one end of my sling-shot tie-outs attached to my HH fly.

    Here's a link (with photos) I posted years ago on whiteblaze.
    Last edited by tlbj6142; 01-14-2010 at 08:10.
    Yellow Jacket

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Location
    south carolina
    Hammock
    none
    Tarp
    none
    Posts
    829
    I'd be interested in a set of eight for my WD v2. I'm still trying to figure out how I'm going to get a good tight pitch when I've got a steep pitch for foul weather mode. Using a taught-line hitch is fine for a less steep pitch, but I can't get the right amount of tension on the line with only a few inches of line to work with.
    I have heard your confession I know who you blame
    If you had it all back you'd just lose it again
    Can't bank on redemption if you ain't saved
    Don't bring me your tales of temptation and loss
    Don't bring me the pieces of your shattered cross

    -- Stuart Adamson

  10. #10
    Senior Member tlbj6142's Avatar
    Join Date
    Jun 2008
    Location
    Columbus, OH
    Posts
    196
    Quote Originally Posted by fulminated View Post
    I can't get the right amount of tension on the line with only a few inches of line to work with.
    You could stake it right to the ground (place the stake right through the tarp's tie-out). Though that doesn't give you ability to use tensioners. And/or have a few short loops of tubing on hand to use for "close to the ground" tensioners (larks head the tubing through the tarp's tie-out and run your stake through the loop, position the stake in such a way to generate some tension on the tubing).
    Yellow Jacket

  • + New Posts
  • Page 1 of 3 123 LastLast

    Similar Threads

    1. What are you interested in?
      By TallPaul in forum General Hammock Talk
      Replies: 2
      Last Post: 01-06-2013, 21:54
    2. Interested in some kind of Pod
      By Sidewinder in forum Speer Hammocks
      Replies: 36
      Last Post: 10-29-2011, 00:20
    3. Interested in a trade?
      By pullmyfinger in forum [SOLD/WITHDRAWN] Items no longer available
      Replies: 5
      Last Post: 05-28-2011, 20:48
    4. From SC and Very Interested In HamCampn
      By TheNumberSix in forum Introduce Yourself
      Replies: 8
      Last Post: 01-29-2011, 11:14
    5. I'm interested.
      By sevenspirits in forum Clark Jungle Hammocks
      Replies: 4
      Last Post: 06-30-2010, 09:02

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •