DIY Gear Supply - Your source for DIY outdoor gear.
Longer darts would be good for the ends. I make all darts six to eight inches long. There are diminishing returns for long darts, because it's the edges and the fabric near the edges that you want to shape.
I dart the ends, the sides, the corners...
- MacEntyre
"We must, indeed, all hang together or, most assuredly, we shall all hang separately." - Ben Franklin
www.MollyMacGear.com
First, I would build it they way it is designed because this is a proven method. However, playing with it during the construction is the best part. I would tack a few darts and then pin it up to a hammock and see how it fits with the longer darts before I committed to anything permanent. But I think MacEntyre is right, the longer darts may prove more useful on the ends with the longer quilt. I think this may accomplish very near the same effect as having draw cord channels in the end.
"I aim to misbehave." - Capt. Mal Reynolds
Mind of a Rat Youtube Channel
Hay thanks for the the input. I see great minds think alike. When I start,I will take some photos of the stages of building it.
"The real man smiles in trouble, gathers strength from distress, and grows brave by reflection."
Thomas Paine
Scott - Thanks for posting the instructions for this UQ! I just finished a slightly modified version w/ 4 layers of IX. The finished size is 66" x 47" and I darted the ends and the sides (but not the corners Mac...). I posted a detailed description in a separate thread under DIY. Also thanks to MacEntyre for his advise and input.
Thanks again for the instructions, tips and inspiration!
Very nice Dave!
Scott,
How much does it weigh.
DIY Gear Supply - Your source for DIY outdoor gear.
Sorry Scott, meant to address that to GvilleDave. Thanks for the response though!
Still lovin my IX UQ.
Mine being 66" x 47", 4 layers IX w/ just the outside covered in 1.9 RS weighs in at 24.7 oz w/ suspension complete.
Bookmarks