Noob here. I know there are many different ways to do CRL.
I have a 30' piece of Zing It I plan on using for my ridgeline. I have a chinook 12x9.6 tarp which I am going to add some webbing and D rings to the centre grommets for extra support for where it attaches to my ridgeline.
I don't want my ridgeline to attach to my tarp (just attach my tarp to the ridgeline). I also like the V setup for lack of rubbing between tarp suspension and hammock suspension.
So here is what I was thinking:
Use a tarp flyz on each end of the ridgeline (gets rid of a prusik if I have a dutch hook on one end instead of 2 flyz) and then a zing it loop on my webbing on each side of the tarp with a dutch hook on each loop and attach these to a prusik on the ridgeline to centre/adjust my tarp.
Thoughts? Too complicated with the loops?
I was thinking the other thing I could do was tarp flyz on one end and a dutch hook on the other that would attach to prusik on the ridgeline.
Thanks everyone!
Bookmarks